It is frustrating when you will get to see the Amana washer not turning on. It fails to start cycling after pressing the start button.
There are so many reasons why this is happening.
However, you may start with the most common problem- the Amana washer start button is not operating.
I guess, this happens most of the time, and it is pretty easy to fix. Here you need to hold the start button for 3 to 20 seconds.
I will cover all the problems and fixing tips. To know them read my post on- 6 easy ways to fix an Amana washer that won’t turn on” 101 guidelines.
Amana washer not turning on- easy ways to fix
Here are some basic problems for why won’t my amana washer start. Have a look at them and it will work for both Amana front and top load washer.
Here are some common problems with the Amana washer top loader while not turning on
Non-operational touchpad or control lock issue
Maybe you forgot that, the touchpad either you have locked or someone else like your wife.
Since the touch control is locked so, it won’t be operational turns out that your washer won’t turn on.
Here, you will need to activate the control lock, once you will unlock it then the light will turn on automatically.
Without solving this issue the touch command won’t work!
Lid is locked
Secondly, for the top loader, the lid sometimes gets locked or closed and it is latched to the top loader. For that, it is unable to operate. This feature won’t come up with every washer type. To solve it, you need to know how to reset amana washer lid lock.
Delay start setting problem
You should not activate the delay start or press the button delay start. If accidentally pressed the button then reset the settings.
Ensure the proper electrical supply without faulty board
Now you come to solve the problem with not turning on or powering on the issue. Just follow the 6 easy guidelines below:
Amana washer start button not working
Here the quickest solution is to factory reset the Amana washer.
After all, every machine is a machine that is stuck in the middle of something. Before going into deep troubleshooting, every machine needs to be reset first.
So, the first diagnostic step is to reset your Amana washing machine from the control panel.
These tips will help you when you see the Amana washer start button not working
Here, you need to turn off the Amana washer and start it after a minute later. Before that, don’t forget to press the power button and hold it for 20 seconds. After 20 secs later the display light will blink.
This is the easiest solution and if it won’t work out then go through the following troubleshooting.
Amana washing machine line fuse problem
When your washer is overloaded with an electrical supply then the fuse will blow out. Due to the overloaded and unbalanced electrical power supply, it may happen.
With the faulty electrical supply, you may not be able to fix the washer since the problem is not with your Amana washer.
This line fuse or thermal fuse location may vary depending on your model. It may exist within the control panel, control board area, or behind the back panel of the washer.
Here you either need to bring up an electrician or you need to fix it with your own hands.
Don’t fret, it ain’t tough. Here you will need to check out components, for example, wires, motors, and drain pump.
Drain pumps have certain do’s and don’t while setting up. To do so, follow our article on Amana washer machine troubleshooting manual.
Apart from that, the thermal fuse is another problem that might cause the washer won’t run. It happens for the fuse blowing too. Here you need to determine whether it is faulty or not.
A multimeter will be handy to use for testing the continuity. If it is not operational then think about replacing or resolving the fuse to blow.
Amana washer won’t turn on after power outage
Ensure the washer is plugged correctly into a working electrical outlet. Then also confirm the outlet is receiving power.
Step 1: Plug in the other devices to test if the washer outlet is working.
Step 2: If it isn’t working and receiving power, check the circuit breaker. Check it to know if it has stumbled.
Step 3: If the power supply is ok, you should check the power cord. If you notice any damage, like cuts or fraying, you may change or replace it with a new one.
Check the door latch/lid switch
You may find a switch from most washers. This switch prevents the washer from turning on if the door or lid is unlocked or open.
So, check to see if the washer’s door is properly closed or latched and if the switch is working or functioning correctly.
In that case, press the Amana washer’s door to ensure it is firmly latched or closed.
When in troulble with the lid switch, before replacement you can bypass the lid switch.
Amana washing machine no power no lights
The malfunctioning of the control board is also responsible for the washer not turning on and even you may notice your washer has no power and no lights.
So, in that case, if the door latch is not the issue, you can take your eyes to the power supply or control board. A faulty timer or damaged power cord will also be responsible for showing no power no lights issues of Amana washing machine.
let’s get these issues and their solution from the below sections:
Power Supply Issues:
The most common reason for the washing machine to have no power is a problem with the power supply.
This could be due to a tripped circuit breaker, a blown fuse, or a faulty power outlet.
If the washing machine is not receiving electricity, it won’t show any lights or power on.
How to troubleshoot the power supply issue?
- Ensure the power outlet is functioning properly by plugging in another device or appliance. If the other device doesn’t operate, there would be an issue with the power outlet. In that case, you should call a technician to check this issue.
- Then check for any tripped circuit breakers or blown fuses in your electrical panel.
- If the power outlet is not working, try plugging the washing machine into a different outlet.
Check the control board:
The electronic control board acts as the brain of the washing machine, governing various functions.
Normally, A washer control board fails due to power surges, a component malfunction, or other issues, the washing machine won’t power on or show any lights.
Even if your washer control board is damaged or faulty, your washer won’t turn on which means your washer doesn’t have any power and no lights.
Check to see if there is any damage or signs of burn marks on the board.
If you find a problem with the control board, you may require to change or replace it with a new one.
You can also try to reset the board. To do this,
- Unplug the washer.
- Wait only for a few minutes.
- Now plug it back in.
For the faulty control board, you will need to reset the washer. You will get a detailed troubleshooting guide from this post: Amana washer reset troubleshooting.
Power Cord Problems:
A damaged or improperly connected power cord can prevent the washing machine from receiving power.
If the power cord is frayed, cut, or not plugged in correctly, the machine won’t function and turn on.
How to troubleshoot the power cord issue?
- Verify the power cord is securely plugged into both the washing machine’s power input and the power outlet.
- Look for any visible damage or fraying in the power cord. If damaged, replace the cord with a compatible one.
Motor or Motor Control Board Issues:
Problems with the washing machine’s motor or its control board can prevent the machine from powering on.
A malfunctioning motor or control board may not allow the machine to start its operations.
How to troubleshoot?
Testing the motor and the control board requires technical expertise. So it’s best to seek professional help.
Check the timer functionality
If the above is not the issue, check the timer functionality. It would be the cause of the timer malfunctioning.
Anyway, to check it, you can manually advance it during the several stages of the washer cycle.
If you find any signs of damage or it is faulty, then replace the timer.
Other Internal Component Failures:
There could be other internal component failures. Such as a faulty fuse on the control board or a damaged wiring harness, that may lead to a loss of power and lights.
To troubleshoot the fuse, you should first access the control board. If you decide to proceed, ensure to unplug the washer from the power source before beginning the inspection.
Here’s a general guide on how to check the control board fuse:
How to check the control board fuse?
- Locate the control panel of your Amana washer. The control board is usually housed behind this panel.
Depending on the model, you may need to remove screws or clips to detach the control panel and access the control board. - Once you have access to the control board, look for the fuse. The fuse is a small, cylindrical component with metal ends and a glass or ceramic body.
The fuse’s location can vary depending on the washer model, but it’s typically located near the electronic control board. - Carefully examine the fuse to see if it’s intact or blown.
If the fuse is blown, you’ll notice a break in the metal filament inside or a discolored appearance. - If you have a multimeter, you can perform a continuity test to determine if the fuse is functional.
Set the multimeter to the continuity or resistance mode (the symbol for continuity is usually a sound wave or diode symbol). - Touch the multimeter probes to each end of the fuse. If the fuse is intact and functional, the multimeter will show a reading close to zero ohms. If it reads infinity, the fuse is blown and needs replacement.
- If you find that the fuse is blown or faulty, you’ll need to replace it with an identical fuse.
- Carefully insert the new fuse into its holder and ensure it is securely in place.
- After replacing the fuse and ensuring everything is securely reassembled, plug the washer back into the power outlet.
- Test the washer to see if the power is restored and if the control board functions correctly.
The troubleshooting isn’t working; how can I solve the issue?
The above troubleshooting steps won’t fix my issue with turning on my washer. What can I do?
Don’t worry if it’s happening. We will describe some possible solutions you can try to solve your problem.
Let’s observe some in-depth solutions to consider:
Replace any damaged parts
If you doubt that washer parts like the power cord or control board are damaged, you can change or replace them to solve the issue.
Here are some replacement guide for you:
Repairing the faulty components
If you notice any faulty components, you can repair them. Yet, you must ensure you have the right tools and elements to fix or repair it.
Even ensure you are feeling comfortable working with the washer.
Then try to repair the faulty components of your Amana washer.
How do I avoid Amana Washer is not turning on?
You can prevent any issue with the washer if you maintain some essential matters. You can also control the washer from not turning on.
To do it, follow and take the below preventive steps:
Regular maintenance of your washer may prevent any unwanted situations. You should
Clean the washer’s lint and drain filter regularly. Find out where is Amana washer filter located and clean them
Check the washer hoses for any damage regularly.
Check also the drum of your Amana washer.
The washer sometimes may not turnig on due to Amana washer is shaking violently due to it’s off balance condition.
Proper usage and care of any item can prevent any issues. So follow the instructions of the manufacturers to use the washer.
You should avoid overloading the washing machine. It will help to increase the life of the washer.
Find any issues with your washer as soon as possible. It will help to prevent further damage to the washer’s components and costly repair.
So take any necessary steps to replace or repair the washing machine.
Conclusion
We hope you have got a better understanding of the Amana washer not turning on. Even you have taken the troubleshooting guide.
So, by following the overhead steps, you can troubleshoot the issue with your Amana washer not turning on. You may hopefully get it up and running again.
Leave a Reply