Amana washer fuse location

Amana washer fuse location: learn where it is

Finding your Amana washer fuse location? First remember, this location may vary depending on the model you have.

In general, Amana washers may not have a fuse as a separate component. Instead, they may use circuit breakers or thermal fuses to protect the motor and other components from electrical overload.

It is normally found either within the control panel or on the main control board. In some models, you may notice it from the back panel of the washer.

Sometimes this line fuse or thermal fuse may be blown because of the overheating. To fix this issue you must know about the fuse location and need to remove or replace it.

In this article, we will answer Does an Amana washer have a fuse, and if so, where is the fuse located?

Does Amana washer have fuses

Does an Amana washer even have a fuse? The short answer is yes, most Amana washers do have a fuse known as a thermal fuse.

This fuse serves as a safety mechanism to protect the washer from electrical overloads, surges, or other issues. These issues could potentially damage the appliance.

So, now that we’ve established that Amana washers have a thermal fuse. Let’s move on to the critical question: Where is the Fuse Located in the Amana Washer?

Amana washer fuse location: where it is

Amana washer fuse location
Amana washer fuse location

As we have to above, you can normally find the fuse within the control panel, on the main control board, or from the back panel of your washer.

Anyways, the exact location always varies based on your used model. Here we’ll explore the common guide to finding the fuse location on your Amana washing machine.

How to locate Amana washer fuse

How to locate Amana washer fuse

Step 1: Disconnect the washer from the power source.

Step 2: Access the fuse from the below area that your washer has:

In some models, you may need to remove the control panel cover to access the fuse. The fuse is often located behind the control panel. Access the fuse by removing screws or clips that hold the panel in place.

In newer models, the fuse may be on the main control board itself. In this case, you would need to access the control board behind the front or rear panel of the washer.

In some instances, the fuse may be found behind the back of the washer. Access it by removing the rear panel.

The fuse is usually a small, cylindrical component, similar in appearance to a traditional glass fuse or a ceramic fuse. It may be labeled as “fuse” or have a rating (e.g., 15A, 20A) printed on it.

Step 3: Carefully check the fuse for any signs of damage or discoloration.

If the fuse appears to be blown (e.g., a visibly broken filament or burnt marks), it likely needs to be replaced.

Washing machine fuse replacement

If you’ve confirmed the fuse is blown, you’ll need to replace it with a new one with the same amperage rating.

You can find replacement fuses at most appliance stores or online retailers.

Then follow the below steps to replace the fuse:

After accessing the blown fuse from the control panel, main control board, or the back panel, carefully remove the damaged fuse from its socket.

Insert the new fuse into the same socket and ensure it’s securely in place.

Reassemble the control panel and any panels you removed to access the fuse.

Plug your washer back in and test it to see if it’s functioning properly.

Amana top load washer fuse location

Amana top load washer fuse location

The circuit breaker or thermal fuse is located on the back of the washer, behind the rear panel.

In some models, the thermal fuse may be located inside the control console.

To access the thermal fuse:

  • Unplug the machine.
  • Access the control panel by locating and removing any screws or clips that secure it in place.
  • Check the electronic control board or timer assembly beneath the control panel to find the fuse.

Amana front load washer fuse location

The location of the circuit breaker or thermal fuse may vary.

In some models, it may be located on the control board inside your washer door.

In other models, it may be located on the back of the washer, behind the rear panel, similar to top-loader models.

Conclusion

So, if you are finding your Amana washer fuse location, don’t worry.

In most cases, you can locate the fuse within the control panel area or on the main control board.

We’ve already covered how can you access the fuse from this area. So, try out this method, locate the fuse, and remove or replace it if required to prevent any issues.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *