Are you facing issues with your Amana washer, such as the timer refusing to advance, a lack of agitation, drainage problems, or even a concerning burning smell?
If your answer is yes, there’s a good chance that the culprit is a malfunctioning lid switch. In that case, you obviously need to check and replace the lid lock switch if necessary.
Don’t worry; you don’t need to be a professional technician to replace it.
In this blog post, we’ll take you through the process of Amana washer Lid Switch Replacement, step by step.
Why Replace Amana Washer lid lock
Replacing the lid switch on the Amana washer is necessary if the switch or lock is malfunctioning or defective.
The lid switch is a safety feature found in most top-load washing machines, including Amana models. This feature is designed to prevent the washer from operating when the lid is open.
When the lid is closed, the switch activates, allowing the machine to run.
Here are some reasons why you may need to replace the lid switch:
- The washer won’t start due to a malfunctioning lid switch.
- Intermittent operations can cause start-and-stop issues.
- A malfunctioning lid switch can prevent spinning and agitation.
- Error codes related to the lid switch may be displayed.
- Safety concerns arise if the washer operates with the lid open.
When these issues arise, you just need to execute the Amana washer lid switch replacement process.
Here the good news is that you don’t need to be an expert to tackle this issue.
We’ll tell you here how can you replace the lid lock with step by step guide.
Amana washer Lid Switch Replacement: step-by-step guide
Before you start the replacement method, first things first, gather your tools.
- Channel-lock pliers
- Quarter-inch nut driver
- Flat head screwdriver
Then unplug the washer from the electrical power source to avoid any accidents. Also, turn off the hot and cold water supply.
Now follow the below steps gradually:
Amana washer lid lock replacement
Start by disconnecting the drain hose and draining any excess water. A towel nearby can be handy for any spills.
You may find the lid lock from the top of the washer or from behind the front panel.
If it’s from the top, open the washer’s lid. If it’s from behind the front panel, you may need to remove the panel first.
- Using your quarter-inch nut driver, remove the small access panel on the back of your washer. This will give you access to the lid switch assembly.
- Next, remove the upper back panel by unscrewing the three screws.
- Don’t forget to release the wiring harness from the control panel by pressing the tabs on the bottom and gently pulling it out. It can be a bit snug, so wiggle it if needed.
With the panels and wires out of the way, you can now access the lid switch assembly.
Carefully lift and slide the top panel back and forth until it unlocks. There are two metal tabs that need to slide into slots on the top, so be gentle.
Now, the fun part! The lid switch assembly is secured in place with some clips.
Use your flat head screwdriver to flip up the middle clip and push out the wire harness.
Once it’s released, unscrew the two-quarter-inch mounting screws and grab your new OEM replacement lid switch.
Place it with the lid up, ensuring it’s secure. It should click into place.
If your replacement kit includes different colored clips (like a white one and a grey one), replace them accordingly.
With the new lid switch in place, reverse the process. Secure the wire harness, reattach the panels, and don’t forget to reattach the hoses.
Ensure all holes are aligned, and the panels snap back into place securely.
Now, you can reconnect your washer to its power source, turn on the water, and plug it in. Give it a test run to make sure your Amana washer is back in action.
Wrapping It Up
Congratulations! You’ve successfully replaced the lid switch on your Amana washer.
When you’re experiencing timer troubles, agitation woes, drainage dilemmas, or you’ve detected that mysterious burning smell, it may be time to check your lid switch.
We hope this step-by-step guide outlined above has been helpful, and your top-load Amana washer is back in tip-top shape.
Leave a Reply