amana-washer-cold-water-not working

Amana washer cold water not working (fixed in 5 steps)

Is your Amana washer cold water not working? If yes and your washer is slow or not filled with cold water, follow our below tips to fix it easily.

  • Check the water supply and ensure the cold water faucet is turned on.
  • Inspect the cold water hose for kinks, bends, or clogs.
  • Examine the cold water inlet valve for any obstructions or damages.
  • Check the water pressure if it is low or not.
  • If all else fails, consider seeking professional help from a certified technician.

Scroll down to get detailed instructions to fix this issue and learn why your Amana washer’s cold water might not be working.

Amana Washer Cold Water Not Working: reason and solution

Amana Washer Cold Water Not Working

Before we analyze the complex solutions, let’s try to check these basic steps first.

Step 1: Double-Check the Basics

  • No Cold Water at All: In this case, your Amana washer doesn’t dispense any cold water, whether you select the cold water cycle or a mixed one that requires both hot and cold water.
  • Intermittent Cold Water: Your washer might have occasional cold water issues, where it works sometimes but not always. This inconsistency can be perplexing.
  • Cold Water Is Too Cold or Too Hot: Sometimes, your washer might deliver water that’s way too cold or unexpectedly hot for your selected setting.
  • Ensure the washer is plugged in and turned on.
  • Confirm the water supply to the washer is not interrupted. Sometimes, a closed or partially open water valve can cause this problem.

If all is ok, then go through the below step-by-step troubleshooting process to fix the issue of your Amana washer cold water not working.

Step 2: Check the Water Inlet Hoses

The next step is to inspect the water inlet hoses. Here’s what you need to do:

  1. Unplug the washer and turn off the water supply.
  2. Examine the hoses for kinks, cracks, or any visible damage. If you notice any issues, replace the hoses.

Step 3: Clean the Water Inlet Screens

Clean the Water Inlet Screens

Mineral deposits and debris can clog the water inlet screens, preventing proper water flow. To clean the screens:

  1. Turn off the water supply and unplug the washer.
  2. Remove the hoses from the back of the washer.
  3. Look for the screens inside the hose connections and carefully remove them.
  4. Clean the screens with a soft brush or by rinsing them with water.
  5. Reattach the screens and hoses.

Step 4: Test the Water Pressure

Test the Water Pressure

Sometimes, low water pressure can be the root cause of cold water issues. Here’s how to check the water pressure:

  1. Turn off the washer and unplug it.
  2. Disconnect the cold water hose from the washer.
  3. Place the end of the hose in a bucket.
  4. Turn on the water supply. If the water flows freely, the issue might be inside the washer.

Step 5: Inspect the Water Inlet Valve

Inspect the Water Inlet Valve

If the previous steps haven’t resolved the issue, it’s time to look at the water inlet valve:

  1. Unplug the washer and turn off the water supply.
  2. Locate the water inlet valve (usually at the back of the washer).
  3. Remove the wires and hoses connected to the valve.
  4. Check the valve for any clogs, debris, or visible damage. Clean or replace it if necessary.

Wrapping up

When your Amana washer cold water not working, it can be worrying.

But our blog post provides a step-by-step troubleshooting guide to help you resolve this issue.

Start by checking the basics, ensuring the washer is plugged in and the water supply is uninterrupted.

Then, inspect the water inlet hoses for damage and clean the water inlet screens.

Testing the water pressure and inspecting the water inlet valve are crucial steps in identifying the problem.


Leave a Reply

Your email address will not be published. Required fields are marked *