Is your Kenmore washer model 110 giving you trouble? Perhaps you’ve discovered a pesky issue, or you’re looking to perform some routine maintenance.
One of the most crucial aspects of washing machine maintenance is knowing how to disassemble it properly.
But, how to take apart a Kenmore washer model 110?
Fear not! By the end of this blog post, you’ll have the confidence and skills to disassemble and troubleshoot your Kenmore washer model 110 with ease.
Whether you’re dealing with agitator issues, control panel malfunctions, or other concerns, this step-by-step guide will help you confidently navigate the disassembly process.
When you need to disassemble a Kenmore washer model 110?
When it comes to home appliances, the washing machine is undoubtedly one of the most valuable. It keeps your clothes fresh and clean, and it’s a real time-saver.
However, like any other machine, it may occasionally require maintenance or repairs. In that case, you must know how to take apart a Kenmore washer model 110.
Not only that, you need to disassemble the washer in the
You may need to disassemble a washer for:
- Repairs and Maintenance: To troubleshoot your Kenmore washer model 110 issues like noise or malfunction.
- Cleaning: To remove dirt and residue for better performance.
- Upgrades and Modifications: For adding new features or enhancements.
- Inspection: To check for wear, loose connections, or hidden issues.
- Replacing Parts: To swap out worn or damaged components.
- Transportation: When moving the washer to a new location.
How to take apart a Kenmore washer model 110
Before you learn the disassembling process, you must have some knowledge about the this washer parts. It will help you disassemble the washer during maintenance.
you can also pick the Kenmore washer model 110 parts diagram to visually understand several parts of the washer.
Anyway, now let’s take apart your Kenmore washer in simple steps for several cases.
Step 1: Unplug and Turn Off Water Supply
Unplug the washing machine from the electrical outlet to ensure safety.
Additionally, locate and shut off the water supply valves connected to the washing machine. This step helps prevent unexpected water spillage during the process.
Step 2. Take out Agitator Cogs
Agitator cogs are small plastic parts located inside the agitator. They are responsible for creating the washing action. Over time, they may wear out and require replacement.
To address or replace agitator cogs you need to disassemble as like the below process:
- Lift the washer’s lid to access the agitator.
- Remove the fabric softener dispenser or agitator cap. This will expose the agitator assembly.
- Lift out the cover and, if applicable to your model, use a 1/2-inch square drive to unthread the agitator retainer.
- Remove the upper agitator, along with any other components.
- Replace the worn cogs and reassemble the components in the reverse order.
Step 3. Remove Control Panel
Control panel components, such as selector switches and timer switches, can become faulty over time. Replacing them can restore the washer’s functionality.
To replace these components learn how to take apart the control panel:
- Begin by detaching the two end caps on the control panel.
- Use a Philips head screwdriver to unthread the screws securing the control panel.
- Lift up the control panel to access and replace the necessary switches.
Step 4. Disconnect Lid Switch and Drive Motor
The lid switch and drive motor are essential parts of the washing machine.
If you’re dealing with these parts, you’ll need to disassemble further:
To replace these components:
- Disconnect the lid switch wire connector.
- Release the spring clips securing the cabinet to the rear panel, allowing you to remove the cabinet.
- Replace the lid switch assembly or the drive motor as needed.
Step 5. Remove the Inner Tub and Basket Drive
The inner tub and basket drive are components responsible for the washing action within the washer.
To work on the inner tub or basket drive, follow these disassembling steps:
- Release the retaining tabs to disconnect the fill spout from the rear panel.
- Disconnect the hoses and components as necessary.
- Remove the upper agitator and other components.
- Unthread the necessary bolts and disassemble the inner tub and basket drive.
- Reassemble these components in the reverse order.
Step 6. Cabinet Reassembly
After completing your repairs, it’s time to put everything back together:
- Reinstall the cabinet by sliding it underneath the base frame. Ensure to align the notches on each side of the cabinet with the tabs on each side of the base frame.
- Secure the cabinet with spring clips.
- Reconnect the lid switch wire connector and secure the control panel.
- Reattach the drain hose and water supply lines.
- Turn the water supply back on, plug in the power cord, and your washer should be ready for use.
Final thought
we hope you might learn how to take apart a Kenmore washer model 110 in different situations to troubleshoot or clean it.
With this step-by-step guide, you can confidently handle common repair tasks and keep your washing machine running smoothly.
If you’re unsure or uncomfortable with any step, it’s always a good idea to consult a professional technician.
Leave a Reply