Is your Kenmore washing machine not spinning but making noise?
Don’t worry! In this detailed troubleshooting guide, we’ll walk you through step-by-step instructions to identify and fix the problem.
From testing the lid switch to examining the motor coupler, our guide will help you restore your washing machine’s spinning function in no time.
How to fix the Kenmore washing machine not spinning?
If your washer won’t spin properly then here is how you can fix it ASAP:
1. Testing the Lid Switch
The first step in troubleshooting a washing machine that is not spinning is to test the lid switch. Follow these instructions:
1.1. Plug in the washing machine and set it to the fast agitate/fast spin mode.
1.2. Rotate the timer to the spin cycle and press the lid switch.
1.3. If you hear a noise but the drum doesn’t spin, it’s time to move on to the next step.
2. Checking Speed Modes
To further narrow down the issue, it’s essential to check the different speed modes of your washing machine. Follow these steps:
2.1. Set the washing machine to fast mode and listen for any noise.
2.2. Repeat the same process with the slow mode.
2.3. If you hear a noise only in one mode but not the other, it indicates a problem with the motor speed.
3. Examining the Motor Coupler
Next, we’ll examine the motor coupler, which is a common culprit for a washing machine not spinning. Here’s what you should do:
3.1. Unplug the washing machine and tilt it backward.
3.2. Locate the motor coupler, which is behind the motor and between the transmission.
3.3. Inspect the coupler for any visible signs of damage, such as cracks or disconnection.
3.4. Ensure your safety by unplugging the machine before proceeding with any further inspection.
4. Disassembling the Cabinet
If the motor coupler appears intact, the next step is to disassemble the cabinet to access the motor and coupler. Follow these instructions:
4.1. Refer to the manufacturer’s manual or search online for specific instructions on disassembling the cabinet for your model.
4.2. Take necessary precautions and ensure the machine is unplugged before proceeding.
4.3. Document the process by taking pictures to assist you during reassembly.
5. Replacing the Worn-out Coupler
Once you have access to the motor and coupler, you can determine if the coupler needs to be replaced. Follow these steps:
5.1. Carefully remove the motor and examine the coupler for any signs of wear or rounding.
5.2. Compare the coupler with a new one to confirm the extent of the damage.
5.3. If the coupler is worn-out or rounded, it needs to be replaced.
5.4. Document the position and connections of the motor and coupler before removing them for easier reinstallation.
6. Testing the Repaired Washer
After replacing the worn-out coupler, it’s time to test your repaired washing machine. Follow these final steps:
6.1. Reinstall the motor, ensuring all connections are secure.
6.2. Plug in the washing machine and bypass the lid switch to avoid reassembling the cabinet.
6.3. Test the machine by running a spin cycle, and observe if the drum spins properly.
6.4. If the washer is now spinning as expected, you have successfully resolved the issue.
7. Additional Tips and Resources
Regularly clean and maintain your washing machine to prevent issues like worn-out couplers.
Consult your manufacturer’s manual or website for specific troubleshooting steps for your model.
If you’re not comfortable with disassembling your washing machine, consider contacting a professional technician for assistance.
Kenmore washing machine not spinning or draining:
It’s very embarrassing if your Kenmore washer not spinning as well as draining. From the above, we’ve learned about spinning. But what we can do if it’s not spinning and draining as well?
It happens because of the faulty lid switch, drive motor, drive belt, faulty or clogged drain pump, drain hose, or the defective timer or control board.
Whatever the reasons, don’t worry about that issue.
You can just follow our article that we’ve covered about Kenmore washers not draining.
Read this article and learn why the Kenmore washer won’t drain or spin and what you can try to fix this issue.
Kenmore washing machine not spinning or agitating:
First and formost thing why the washer won’t perfectly spin or agitate is due to the faulty agitator. Check and replace the agitator if needed.
Let’s see some other reasons behind this issue with their probable solutions:
Broken drive belt
A broken drive may be the most common cause for the washer to not agitate or spin. Over time, it may be worn out or broken.
In that case, to repair your washer, you should replace the drive belt with a new fresh one. The replacement process is straightforward.
Damaged stator/rotor
The burned wirings or damaged rotor/stator may be another cause for the washer to not agitate or spin.
If the rotor wirings are burned or damaged, you should replace the stator or rotor to repair the washing machine.
Malfunctioning door lock switch
If the door lock switch of your front load Kenmore washer is malfunctioning, it won’t spin properly.
In that case, you should replace the lock switch with a new and fresh one.
Faulty timer
A faulty timer will be responsible for your washer neither spinning nor agitating.
In that case, the replacement of the timer may solve the issue.
Kenmore washing machine not spinning front load: reason
Your front-load Kenmore washer may not spin or agitate because of;
- The faulty door lock switch
- The damaged or broken drive belt
- The faulty drive motor
- The overload or unbalanced load, etc.
Whatever the reason, you should check this item and repair or replace them with a new one if necessary to resolve this issue.
In conclusion
We hope this article will resolve your Kenmore washer not spinning easily! Just execute this step perfectly, and try the amazing you’ve done.
Before that, inspect the reason behind this issue, and apply the process we’ve already taught you.
Yet, if anything is wrong with you, don’t hesitate to call a repairman to get proper assistance.
Happy washing and spinning!
Leave a Reply