Understanding Kenmore washer filter location is so much important for maintaining optimal performance and extending the washer’s lifespan.
In your top load Kenmore washer, you may locate it on top of the agitator or inside a cap on top of the agitator.
In your front load washer, the filter is mainly located behind a small panel at the bottom of the machine.
The washer filter prevents debris, lint, and foreign objects from entering and clogging the inner workings of your washing machine.
So this filter needs regular cleaning to prevent drainage issues, reduced efficiency, and even foul odors.
Here in this article, we’ll disclose the below key points:
- Where is the filter on the Kenmore washer
- How to locate the filter on the Kenmore washer
- How to clean the filter on the Kenmore washer
- Kenmore top load washer filter location
- Kenmore front load washer filter location
- Kenmore 700, 500, 400, he3 washer filter location
Let’s scroll to know the Kenmore washer filter location and related so more information.
Where is filter on Kenmore washer?
All Kenmore washer models don’t have a filter that you can remove it. Those washers have a filter, the location of the filter can vary depending on the model and type of washing machine you have.
Generally, there are two main types of filters in washing machines: the lint filter and the pump filter.
Here’s an analysis of where these filters are typically located:
Lint filter
The lint filter is designed to catch lint, hair, and other debris that might come off your clothes during the wash cycle.
Not all washing machines have a lint filter, especially modern high-efficiency models. You can mainly see this filter on a top-load Kenmore washer.
Kenmore top load washer filter location
Kenmore top load washer actually contains the lint filter. If your Kenmore top-load washing machine does have a lint filter, it’s usually located near the top of the agitator or inside the drum.
In some models, you may also get the filter below the detergent dispenser or underneath the agitator.
Those top-load washer doesn’t have the filter, they may contain a pump filter that is located near the drain pump.
How to clean the filter on Kenmore top load washer
To clean your top load Kenmore washer filter, follow the below steps:
- Unplug the washer.
- Open the lid of the washing machine.
- If your washer has an agitator in the center of the drum, there might be a cap or fabric softener dispenser on top of it.
- Remove this cap or dispenser to access the filter.
- Underneath the agitator cap, you may find the lint filter.
- Gently pull out the filter. It may be a cylindrical or rectangular component.
- Rinse the filter under warm water to remove lint, debris, and residue.
- You can use soft clothes, a brush, or your fingers to dislodge stubborn particles.
- Let the filter air dry completely then reinsert it.
- Once the filter is dry, carefully slide it back into its compartment and place the softener dispenser again.
For front-load washing machines:
If your front load washer has a lint filter, it may be located inside the drum or near the opening.
Check the user manual for specific instructions on accessing the lint filter.
Pump Filter:
The pump filter is also known as the drain filter or coin trap. It is designed to catch larger objects like coins, buttons, and other debris.
It prevents them from clogging the drain pump and causing drainage issues. This filter is more common in front-load washing machines.
Kenmore front load washer filter location
In your Kenmore front-load washing machine, you may find the pump filter. It is located behind a small panel at the bottom of the machine.
Look for a small door, often with a round tab or handle. You can open the panel by just pulling it. Then you will get the filter.
Kenmore he3 washer filter location
The Kenmore Elite HE3 is a front-load washer. It has a filter known as the “coin trap” or “lint filter.”
This filter is designed to catch lint, debris, and foreign objects to prevent them from causing clogs or affecting the washer’s performance.
The filter on the he3 Kenmore washer is located at the bottom of the front of the machine.
Inside the compartment, behind the access panel, you should see the filter. The filter may be cylindrical or rectangular in shape.
Kenmore Elite washer filter location
Kenmore Elite front-load washers typically have a filter known as the “coin trap” or “lint filter”. It helps catch lint, debris, and foreign objects to prevent clogs and maintain optimal performance. The filter location can vary based on the specific model and design.
Yet, you can normally find it at the bottom of the front of the machine as a cylindrical or rectangular shape.
Old Kenmore washer filter location
Some older models may not have filters those are made before the 20th century. These washer uses gas to operate. But those Kenmore washers are made after 21-th century, these have the filter.
So if you want to know the location of your old Kenmore washer, you should keep an eye on its age.
Even then, if you have an old Kenmore washing machine, follow the below steps to find out if it has a filter.
Under the Agitator:
Many older top-load washing machines have a removable agitator in the center of the drum.
- To access the filter, you might need to remove the agitator.
- Look for a cap or fabric softener dispenser on top of the agitator. This cap can often be removed to reveal a filter or lint trap underneath.
Around the Tub:
Some older models may have a lint filter located around the edge of the inner tub, near the top of the drum.
Check the inner tub’s rim for any openings or compartments where a filter might be located.
Check the owner’s Manual:
If you have the owner’s manual for your older Kenmore washer, it should provide specific instructions on locating the filter.
The manual may also have diagrams to help you understand the filter’s location in your particular model. So check it carefully.
Do all Kenmore washers have a filter?
Not all Kenmore washers have a filter that needs regular cleaning. Older top-loading Kenmore washers and certain front-loading models may have filters.
These filters catch lint, debris, or foreign objects that could potentially clog the drain or affect the washer’s performance.
On the other hand, many modern high-efficiency top and front-loading Kenmore washers use several mechanisms to catch lint and debris. They may not have traditional, user-accessible filters.
Instead, they often use self-cleaning systems or lint traps that are built into the machine’s design.
Kenmore 80 washer filter location
The Kenmore 80 series washer, which is an older top-loading model, typically doesn’t have a filter. These older models often do not include a removable lint filter in the same way that front-load washers do.
Instead, these top-load washers typically rely on the agitator’s design and the machine’s internal systems to manage lint and debris.
Kenmore 700 washer filter location
The Kenmore 700 series washer, like other Kenmore models, may not have a traditional, user-accessible filter.
Instead, these washers often use self-cleaning systems or lint traps within the machine itself to handle lint and debris. However, designs can vary based on the specific model and manufacturing year.
This information is the same for the Kenmore washer 600 series washer.
Kenmore 500 washer filter location
Kenmore 500 series washers may not have a filter. Instead, these models may contain self-cleaning mechanisms or lint traps within the machine.
Yet, you can take the below steps to find out a filter:
Look around the washer for any visible access panels or compartments. Some possible locations where you might find a filter or lint trap include:
- Near the bottom front of the machine.
- Inside the drum, around the door area.
- Behind a removable panel on the back of the washer.
If your washer has a drum with holes, there may be a filter or trap built into the drum itself. Some designs use the drum’s perforations to allow lint to be washed out during the wash cycle.
Kenmore 400 washer filter location
This Kenmore washer does not have a filter. These models may contain self-cleaning mechanisms or lint traps within the machine.
If you have a Kenmore series 400 washer, you can see the bottom parts of the machine, around the door area or inside the drum.
In those places, you will get the filter if this model has it. The good solution will be to follow the owner’s manual to get proper information.
Kenmore washer model 110 filter location
Kenmore washer model 110 is a new version of the Kenmore. It has a filter. But after updating this washer comes with the feature of uneven sharp edges on the outside of the drum.
These edges catch lints or debris while water runs through them during washing.
In conclusion
Depending on your used model, your Kenmore washer filter is located on top of the agitator ( top loader) or at the bottom of the front of the Kenmore washer(front loader).
The Kenmore washer filter location will vary depending o your model. So if you don’t understand where is the filer, follow the owner’s manual.
Some of the Kenmore washers don’t have a filter, but those have it, you should clean the filter regularly to prevent drainage issues.
Leave a Reply