How to clean Kenmore washer: Try 3 method

If you own a Kenmore washer, you should seriously clean it to ensure its optimal performance and longevity. But how to clean Kenmore washer? 

With the use, dirt, lint, mold, or mildew may accumulate on the washer. In that case, you must clean it to prevent odors or mold growth.

To clean your Kenmore washer:

  1. Unplug the washer from the electrical source.
  2. Clean the washer drum by running the hot water cycle with half or 1 cup of white vinegar or washing machine cleaner.
  3. Remove and clean the detergent dispenser.
  4. Wipe the rubber door seal with a vinegar solution or baking soda paste.
  5. Swab down the outside surface with a moist cloth.
  6. Clean the control panel with a mild cloth.
  7. Locate and remove the lint trap or screen( top loader).
  8. Leave the door open after cycles.

You can also use the ‘‘Washer Cleaner cycle” or Chlorine Bleach method to clean your Kenmore washer.

Don’t worry. In this post, we’ll describe all the steps in detail you need to clean your Kenmore washer.

Yet, these steps may slightly vary depending on your specific Kenmore washer model. So, you should check your user manual.

Importance of cleaning your Kenmore washer

By cleaning your Kenmore washer, you’ll not only ensure the quality of your laundry but also enhance the longevity and performance of your washer.

Let’s learn some possible reasons why it’s most important to clean your Kenmore washer:

  • Over time, dirt, detergent residue, and moisture can lead to mold and mildew growth. It is causing unpleasant odors in your washer and transfers to your clothes.
  • The buildup of grime and residue can impact your washer’s efficiency. Even it is affecting its cleaning power and potentially leading to longer wash cycles.
  • Regular cleaning prevents wear and tear on parts. Also, reduce the likelihood of breakdowns and increase the lifespan of the washer.
  • Cleaning cycles help sanitize the drum, removing bacteria and germs that can accumulate during washing.
  • A clean washer ensures your laundry comes out fresh and clean, without any residual odors or contaminants.
  • Regular cleaning prevents stains from the washer.

Because of the above reason, you must clean the washer regularly. So, let’s know the way you can try to clean your Kenmore washer from the below.

How to clean a Kenmore washing machine?

how to clean Kenmore washer

You can clean your Kenmore washer manually or use the washer cleaner cycle method. You can also use the chlorine bleach procedure to clean.

Here we’ve covered more detailed steps for cleaning your Kenmore washer, along with some additional tips for a thorough cleaning process:

How to clean a Kenmore washer manually

To clean the washer with hand in manually, you can follow our below instructions. Before that, gather some materials you need to execute this process.

Materials Needed:

  • White vinegar or specialized washing machine cleaner
  • Baking soda
  • Microfiber cloth or sponge
  • An old toothbrush or soft brush
  • Towel or paper towels

1. Clean the Drum:

drum

Empty the Drum: Remove any items left in the drum and ensure it’s completely empty.

Hot Water Cycle: Select the hottest water temperature and the largest load size. If your washer has a “Clean” or “Tub Clean” cycle, use that. Otherwise, choose a regular hot water cycle.

Vinegar or Cleaner: Add 2 cups of white vinegar or a washing machine cleaner to the detergent dispenser or directly into the drum.

vinegar

Run the Cycle: Start the cycle and let it run through. The vinegar or cleaner will help break down and remove any soap scum, mold, and mineral deposits.

2. Clean the Detergent Dispenser:

detergent dispenser

Remove Dispenser: Depending on your used model, you may need to press a release button or gently pull the dispenser drawer out.

Wash the Dispenser: Remove any removable parts. Wash them in warm, soapy water. Use a toothbrush or soft brush to scrub away residue. Rinse thoroughly and let them dry completely before reinserting.

Clean the Dispenser Cavity: Wipe down the area where the dispenser sits using a cloth soaked in vinegar or cleaner. Ensure you clean any nooks and crannies.

4. Clean the Exterior and Control Panel:

kenmore control panel

Exterior Wiping: Use a damp microfiber cloth to wipe down the exterior of the washer. Also clean the control knobs, buttons, and display panel.

Control Panel: Avoid using abrasive cleaners on the control panel. Instead, use a damp soft cloth to gently clean buttons and displays.

5. Regular Maintenance:

Let the door open after each wash cycle. It allows the drum to dry.

Use the recommended amount of detergent to prevent residue buildup.

How to use Kenmore Clean Washer cycle?

clean washer cycle

You can easily perform the Clean washer cycle/ affresh® Washer cleaner cycle process to clean the Kenmore washer. 

During this cycle, the washer will agitate and spin to remove the soil.

Actually, it is a suggested method to get the best performance. Let’s try this procedure:

  1. Open the Kenmore washer door/lid and take out any cloth items.
  2. Now put an  affresh® Washer cleaner tablet into the bottom of the washer basket. Never place it into the detergent dispenser.
affresh tab
  1. During this procedure, never add any detergent or chlorine bleach, or other chemicals to the washing machine.
  2. Then close the washing machine door.
  3. Select the Cycle button and press it. Now wait a few minutes until it goes to the ‘Clean washer’ cycle.
  4. Press the start/pause/unlock lid button to initiate the cycle.
press start/pause button
  1. Leave the door for a few minutes to allow it completely dry.

How to clean Kenmore washer with Chlorine Bleach

chlorine bleach procedure

In this procedure, you need a proper amount of chlorine bleach. You can try this method as the alternative to the above clean washer cycle method.

Here is the process:

  1. unplug the washer.
  2. Open the washer lid/door. Take any clothing items from the washer.
  3. Take 1 cup(236 mL) of liquid chlorine bleach into the washer bleach compartment.
chlorine bleach
  1. Now close the washing machine door.
  2. Don’t add any detergent or other chemicals to the washer during the procedure.
  3. Now press on the Start/Pause/unlock lid button to initiate the process.
  4. Never add any laundry during this procedure.

How to clean Kenmore washer series 600?

Kenmore washer series 600

Cleaning a Kenmore washer from the 600 Series involves several steps to ensure its proper maintenance. All the steps may be the same as the above procedure.

Yet, you should first check the user manual and see which parts need to clean. If it is a top load washer, there might have a lint trap filter. in that case, you need to take this step to clean it.

If it is a front-load washer, there might have a door seal that needs to be cleaned.

After checking that, you can manually clean this washer. Or you may use the Washer clean cycle and Chlorine bleach procedure to clean the washer perfectly. you will get the instruction from the above section.

How to clean Kenmore washer front load

Kenmore front load washer

It‘s likely the same process to clean your Kenmore front load washer as the above procedure. Just try some extra steps if you want to clean your Kenmore front-load washing machine.

  1. Simply unplug the washer.
  2. Clean the drum and detergent dispenser. ( follow the above-described details).

3. Clean the Door Seal

Inspect the Seal: Check the rubber door seal for mold, mildew, and debris. If there’s significant mold buildup, it’s important to address it.

Vinegar Solution: Mix similar parts of water and white vinegar. Soak a cloth or sponge with this solution. Now clean the seal thoroughly, especially folds and crevices.

door seal

Baking Soda Paste: Make a paste using baking soda and water for stubborn mold. Apply it to affected areas, and let it sit for 15-20 minutes. Then scrub with a toothbrush.

Wipe Clean: Use a damp cloth to wipe away any residue.

  1. Clean the Exterior and Control Panel using a damp soft cloth.
  1. Clean the Filter (If Applicable):

Locate the Filter: The filter is usually located at the bottom of the machine.

front load Kenmore washer filter

Remove Debris: If the filter is removable, take it out and clean it under running water. Remove any accumulated lint, hair, button, or debris.

  1. Now, allow the door open to dry for a few minutes.

How to clean Kenmore Elite front load washer?

kenmore elite washer

You can clean your Kenmore elite washer easily by following the above step-by-step method. Yet you can do it in another way. 

To do this:

  1. First, unplug the washer.
  2. Open your washer door and take out any cloth items from the drum.
  3. Now access the dispenser drawer and pour a ⅔ cup of chlorine bleach.
  4. Select the cycle button and press it. Now wait a few minutes until it goes to the ‘Clean washer’ cycle.
  5. Press the start/pause button to initiate the cycle.
  6. Leave the door for a few minutes to allow it completely dry.

How to clean Kenmore washer top load?

kenmore top load washer

If you have a Kenmore top load washer and want to clean it, follow our above sections where we describe the cleaning method in detail. 

You can manually clean it or use the clean washer cycle and chlorine bleach process to clean the washer.

You might just take some extra steps for that. Here we’ll describe it in short brief:

  1. Unplug the washer and remove any clothes from the washer drum.
  2. Clean the drum and dispenser using 2 cups of white vinegar.
  3. Remove and clean the detergent dispenser.
  4. Clean the Exterior and Control Panel using a soft damp cloth.
  5. Clean the Lint Trap or Screen:

How to clean Top load Kenmore washer filter?

lint filter

Top-load Kenmore washers typically do not have a traditional lint or debris filter like front-load washers.

 Instead, they usually have a lint trap or lint screen. It can be cleaned to prevent lint and debris from clogging the drain pump and causing the Kenmore washer not to drain.

Here’s how you can clean the lint trap or screen in a top-load Kenmore washer:

  1. Make sure the washer is unplugged.

2. Locate the Lint Trap or Screen

In a top-load Kenmore washer, the lint trap or screen is often located near the agitator at the bottom of the drum. 

lint

It’s designed to capture lint, hair, and other debris that might come off your laundry during washing.

3. Remove the Lint Trap or Screen

Carefully remove the lint trap or screen from its location. It may require some gentle pulling or twisting, depending on your washer’s design.

4. Clean the Lint Trap or Screen

Shake off or brush away any lint, hair, or debris that has accumulated on the lint trap or screen. 

You can also rinse it under running water to remove stubborn debris. Use a soft brush or your fingers to loosen any debris that is stuck.

5. Reinstall the Lint Trap or Screen:

Once the lint trap or screen is clean, carefully place it back into its original position in the washer. Ensure it’s securely in place.

6. Leave the door open for a few minutes.

How to clean Kenmore washer model 110?

kenmore washer series 110

Kenmore washer model 110 is another popular model of Kenmore washer. It’s a top-load Kenmore washer.

Regular cleaning and maintenance make its lifespan longer and improve its washing performance.

Yet, cleaning a Kenmore washer model 110 involves similar steps as mentioned earlier.

However, since the model number “110” is used for a range of different Kenmore washer models, the specific features and locations of certain components might vary.

You may use the Chlorine Bleach procedure, in that case, to get the best performance to clean the inside part of your Kenmore series 110 washer.

  1. Read the above instructions to get the step-by-step Chlorine bleach procedure.
  2. To clean the outside of the washer, use a damp cloth and wipe it around the washer to away any spills.
  3. Over time, the washer dispenser tray may be accumulated with some detergent residue.
  4. To remove this residue, you need to clean your dispenser tray. Follow the steps below:
dispenser tray
  • Pull out the dispenser tray, lift it up, and then again pull it out.
  • Use warm water and mild detergent to make soapy water.
  • Then wash the tray and rinse it with warm water.
  • Let it dry, or air dry, and insert the tray in place again.

In conclusion:

Cleaning your Kenmore washing machine is crucial to prevent mold growth or ensure optimal performance.

You should clean the washer with hot water and vinegar or cleaner every 1-3 months.

In this article, we’ve already covered all the necessary steps and instructions you can need to take to clean your Kenmore washer. Just follow and try!

If you seem difficulty, don’t hesitate to contact a professional.


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *