Experiencing a power outage can sometimes disrupt the normal functioning of your Amana washer. If you’re facing issues with your washer after a power outage, performing amana washer reset sequence can often resolve the problem.
In this guide, we will walk you through the steps to reset your Amana washer and troubleshoot common issues that may arise.
How to reset Amana washer after power outage
Here is how you can reset Amana washer after power outage
- Push the timer knob in so the washer is idle.
- Unplug the machine from the power outlet and wait for one minute.
- Plug the washer back in.
- Within 12 seconds, raise and lower the lid of the washer six times.
Step 2: Checking for Error Codes After resetting the inverter board
- it’s important to check for error codes to identify any underlying issues.
- Look for a green blinking light on the inverter board.
- The light will flash failure codes indicating specific problems.
- If you don’t see any light on the inverter board, it may indicate a blown fuse.
- Check the neutral side of the harness for a blown fuse on the white/red wire.
- If you suspect a blown fuse, consult your washer’s user manual or contact Amana customer support for further guidance on replacing the fuse.
- put the washer in a spin cycle and observe if it runs smoothly.
- This will help verify if the reset has resolved the issue.
- If the problem persists or if you encounter any other difficulties, it is recommended to read Amana washer troubleshooting tips to learn as well.
Why is it important to reset the inverter board after a power outage?
power outage can sometimes cause the inverter board to malfunction or lose its settings. Resetting the inverter board helps to restore its normal functioning and resolve any related issues.
How can I identify error codes on the inverter board?
The inverter board’s green blinking light will flash error codes that correspond to specific problems. Consult your washer’s user manual or contact Amana customer support to understand the meaning of the error codes.
What should I do if I suspect a blown fuse?
If you suspect a blown fuse, check the white/red wire harness for a blown fuse. Refer to your washer’s user manual or contact Amana customer support for instructions on how to replace the fuse correctly.
Conclusion
Resetting your Amana washer after a power outage can often resolve common issues and restore normal functionality.
By following the step-by-step instructions provided in this guide, including resetting the inverter board, checking for error codes, and troubleshooting blown fuses, you can effectively troubleshoot and resolve problems with your Amana washer.
Leave a Reply