Kenmore washing machine Model 110 Parts Diagram is not just a simple illustration. It is a valuable tool that empowers you to effectively understand, troubleshoot and maintain your device.
From the motor coupling to the drain pump, every component of the Kenmore Model 110 washer serves a purpose.
Before maintaining or troubleshooting your washer, you must have some knowledge about its parts.
So, we are actually here to familiarize you with some common parts of the washer. Even we will provide the parts diagram so that you can easily understand the parts.
Kenmore 110 washer parts list
Before going to learn about the parts diagram, first, you should know about the existing parts of the washer.
The Kenmore washer model 110 is a popular series. Replacement parts for these washers are widely available.
Note: These parts may vary depending on your model. So check your washer manual to identify the exact parts.
Here are some common parts that you may need for your Kenmore washer model 110:
Control Panel and User Interface
It is an interface for selecting wash cycles, settings, and starting the washer.
Drum and Agitator
The drum and agitator is the main compartment for loading clothes in your washer. Some models have a central agitator while some have a bottom impeller that works like an agitator for washing.
Door or Lid Assembly
The door(front load washer) or lid assembly(top load washer) provides access to the drum. These components include a safety latch mechanism that prevents the washer start if the door or lid is open.
Drain Pump and Hose
The drain pump removes water from the drum and the hose carries water out of the machine. If the pump becomes clogged or fails, washer won’t drain properly.
Water Inlet Valve
The water inlet valve controls water flow for different cycles. If it’s not working correctly, your washer may not fill with water properly.
I write another handy post on how you can replace Kenmore washer water inlet valve, if it sounds faulty.
Motor and Belt
The motor powers the drum’s movement, and a belt connects the motor to the drum or agitator, allowing them to rotate.
Pressure Switch (Water Level Sensor)
It monitors the water level and controls filling. If it malfunctions, it can lead to issues with water levels.
Door Seal (Gasket) for front loader
This rubber component forms a watertight seal between the door and the drum, preventing leaks.
Pump Filter
Kenmore washer drain pump filter collects foreign objects, buttons, and debris to prevent clogs.
Suspension Springs and Dampers
These components balance loads and reduce vibrations during the spin cycle.
Electronic Control Board
The “brain” of the washer is the electronic control board. It processes commands, regulates cycles, and coordinates various functions.
Detergent Dispenser
This part holds detergent, bleach, and fabric softener. It releases them at the proper times during the wash cycle.
Lid Switch or Door Lock
These parts ensure the washer won’t start unless the lid or door is securely closed and prevent accidents.
Motor Coupling
The motor coupling connects the motor to the transmission and enables drum power. If it breaks, the washer may not agitate or spin.
Agitator Dogs
Small plastic parts allow agitator movement in one direction. If they wear out, the agitator won’t work effectively.
Timer Knob
The timer knob manages cycle settings. If it becomes damaged or worn, it may be difficult to set the desired cycle.
kenmore washing machine model 110 parts diagram
Actually, the parts diagram acts as a map, guiding you through the maze of components.
By familiarizing yourself with the parts diagram, you’ll gain a deeper appreciation and it will be easy to take out a Kenmore washer model 110 during maintenance or repair.
In the above section, we’ve already observed some important parts of the washer. Among them,
The Core Components
- Agitator,
- Drain pump,
- Water Inlet Valve
- Timer or Electronic Control Board.
Parts with Safety and Convenience Features
- Lid Switch
- Dispenser Drawer
Structural and Mechanical Components
- Belt
- Transmission
- Drum Spider
- Suspension Springs or Rods
Parts that Maintaining Water Levels and Pressure
- Pressure Switch
Kenmore washer model 110 parts diagram
Let’s see the diagram of the parts to learn where are the parts located:
What size is Kenmore washer model 110
The actual size of a Kenmore washer model 110 can vary based on the specific model and design you have.
Washers come in different capacities, which are often measured in cubic feet. The size of the washer can affect how much laundry it can hold in a single load.
For example, common washer sizes may range from around 2.5 cubic feet for compact models to 5.0 cubic feet or more for larger, high-capacity machines.
Leave a Reply