Kenmore washer code f21: meaning and quick solution

The Kenmore washer code f21 indicates a drainage issue that needs to be resolved.

When this error code appears on your Kenmore washer, it means that the machine is unable to drain properly.

This can be caused by a clog or blockage in the drain hose or the pump filter, or it may indicate a problem with the drain pump itself.

We will provide you with some tips and troubleshooting steps to help you resolve the Kenmore washer code f21. Stick with us to learn more.

Kenmore Washer Code F21: What does it mean?

It is important to understand the Kenmore washer code f21 code and its significance. Error codes in washers provide valuable information about issues and malfunctions.

In the case of the F21 code, it indicates a problem with the drain system. It is typically caused by clogged filters or obstructions in the drain hose.

These common causes can disrupt the normal drainage process, resulting in the error code.

When this happens, it is essential to address the issue promptly to ensure the proper functioning of the washer.

Regular maintenance and cleaning of filters and drain hoses can help prevent the occurrence of the F21 error code.

Kenmore F21 code how to fix

When troubleshooting the Kenmore washer code F21, the first thing to check is if the drain hose is blocked or kinked. Unplug the washer and remove any excess water from the drum.

Then, check the drain hose for any clogs or obstructions. Make sure the hose is not kinked or bent, as this can restrict water flow. Remove any blockages you find.

If so, straighten it or clean any blockages.

Also, check the below things to fix your Kenmore washer code f21.

Ensure the drain hose is installed correctly and securely. It should be upgraded above the level of the washer drum.

Also, it should not be inserted more than 4-5 inches into the drain standpipe.

Make sure the drain standpipe or sink where the washer drains are not clogged. Sometimes, a slow or clogged drain can trigger the F21 code.

The F21 code can also be caused by a malfunctioning drain pump. Inspect the drain pump for any visible damage or obstructions. If you suspect the pump is faulty, replace it.

It is also important to load the washer properly to avoid straining the pump.

Overloading can put unnecessary stress on the machine and affect its performance.

Sometimes, the F21 code can be started by a temporary glitch.

In that case, try pausing the cycle and then restarting it. This may reset the washer and resolve the issue.

Kenmore washers often have a pump filter that can become clogged with lint, coins, or other debris.

Locate and access the filter. Clean it out thoroughly and ensure it’s securely in place.

Some Kenmore washers have a “Clean Washer” cycle. Running this cycle periodically can help prevent buildup in the washer’s internal components.

When to Seek Professional Help to Fix f21 error code Kenmore washer

Is your Kenmore washer displaying the F21 code? If so, it’s important to know when professional help is necessary. Certain signs indicate a need for expert assistance.

For instance, if you have already tried troubleshooting and the problem persists, it’s time to call in a professional technician.

Other indicators include strange noises, excessive vibrations, or leaks that you are unable to fix yourself.

Don’t hesitate to reach out to a qualified technician for prompt and thorough assistance.

Remember, seeking professional help can save you time, money, and the frustration of dealing with a malfunctioning washer on your own.

Other Common Kenmore Washer Error Codes

Kenmore washer code F21 is just one of the many error codes that you may encounter.

Here’s a brief overview of other common Kenmore washer error codes to watch out for.

To help you troubleshoot these errors, here are some quick tips.

For instance, if you come across error code F02, it typically indicates a drain problem. In this case, you should check for clogs or blockages in the drain hose or pump.

Another common error is code F01, which points to a communication problem between the main control board and the motor control board.

In such cases, it’s recommended to check the wiring connections and power supply.

Other codes are below:

Kenmore washer f20

The F20 error code typically indicates a water inlet problem. It means the washer is not getting enough water or there may be a water flow issue.

• Check the water supply valves are fully open and the hoses are not kinked or blocked.
• Ensure the water inlet filters on the washer’s water inlet valve are clean.
• Verify the water pressure in your home is sufficient for the washer to operate correctly.
• If the issue persists, you may need to inspect or replace the water inlet valve.

sud error code Kenmore washer

The SUD error code indicates excessive suds in the washer. This can lead to problems with the washer’s performance.

• Stop the cycle and allow the washer to drain and reduce the suds.
• Use only high-efficiency (HE) detergent and follow the recommended detergent dosage for your load size.
• Run a “Rinse and Spin” cycle to remove excess detergent and suds.
• Ensure you are not overloading the washer, as this can contribute to excessive suds.

Kenmore washer code 5d

The 5D error code is often related to a draining problem, similar to the F21 error code.

It suggests the washer is having difficulty draining water from the drum.

Troubleshoot it by following the above-provided steps for the F21 error code. The steps are similar for both error codes, as they both relate to drainage issues.

kenmore he2 plus error codes f21

The Kenmore HE2 Plus washer is a popular front-loading washer. It offers a range of features and capabilities designed to make laundry tasks more convenient and effective.

If the washer shows an F21 error code, it means the washer has a drainage issue. It means the washer is having difficulty draining water properly.

To troubleshoot and potentially resolve the F21 error, you can follow the provided earlier steps.

• Pause the cycle and disconnect the washer from the electrical outlet for safety.
• Remove any remaining water from the drum.
• Inspect the drain hose for clogs, kinks, or obstructions and clear them.
• Clean the pump filter, if present, and ensure it’s properly in place.
• Examine the drain pump for visible damage or blockages.
• Verify correct drain hose installation, height, and positioning.

Conclusion

To sum up, dealing with Kenmore washer code F21 can be a frustrating experience. Yet, by following the troubleshooting steps mentioned in this blog post, you can resolve the issue on your own.

Simply check the drain hose for any clogs, clean the filter, and inspect the pump motor for any blockages.

You should also care about using the correct detergent and properly loading the washer. It can prevent the code from appearing in the first place.

If you find the problem persists or you’re unsure about handling it yourself, it’s always a good idea to contact a professional technician for assistance.