If you own a Kenmore Series 700 washer and are facing some issues with its performance, fret not! In this comprehensive troubleshooting guide, I will help you identify common problems and provide effective solutions to get your washer back to its peak efficiency.
Whether it’s strange noises, water leaks, or error codes popping up, we’ve got you covered. Let’s dive in and get your laundry routine back on track!
Kenmore series 700 washer troubleshooting
I will now let you know about 13 common problems with your Kenmore 700 series washer.
1. Washer Won’t Start
Is your Kenmore Series 700 washer not responding when you press the start button? Before panicking, check if the power cord is securely plugged in and the circuit breaker hasn’t tripped. If these are fine, try resetting the washer by unplugging it for a few minutes before plugging it back in.
2. Unusual Noises
A common issue with washers is the emergence of strange noises during the washing cycle. If you notice loud banging or grinding sounds, it could indicate an unbalanced load or foreign objects stuck in the drum. Pause the cycle, rearrange the clothes evenly, and inspect the drum for any foreign objects before resuming.
3. Water Leaks
Water leaking from your washer can lead to considerable damage. Check for loose connections in the water inlet and drain hoses. Ensure that the hoses are tightly secured and not damaged. Additionally, inspect the door seal for any signs of wear or tear, as a damaged seal can also cause leaks.
4. Washer Not Draining Properly
If you find water pooling in the drum after a cycle, there might be an issue with the drain pump or a clogged drain filter. Clean the drain filter and check the drain hose for any obstructions.
Check the Drain Hose
Ensure that the drain hose is not kinked or clogged. A blocked drain hose can prevent proper water drainage. Detach the hose and clean it thoroughly.
Clogged Pump Filter
The pump filter can become clogged with debris over time, obstructing water flow. Locate the pump filter (usually found at the bottom front of the washer) and clean it out regularly.
Faulty Drain Pump
If the drain pump is damaged, it won’t be able to remove water effectively. Test the pump by running a drain cycle and listening for any unusual sounds. If the pump is faulty, it needs replacement.
If the problem persists, read my other detailed post on: Kenmore washer not draining.
5. Error Codes
Modern washers like the Kenmore Series 700 often display error codes to indicate specific issues. Refer to the user manual to understand the meaning of the error code shown on the display. This will help you pinpoint the problem and take appropriate action.
6. Clothes Coming Out Wrinkled
If your clothes are coming out of the washer excessively wrinkled, you might be overloading the machine. Reduce the load size to give your clothes more room to move during the wash cycle, preventing excessive wrinkling.
7. Excessive Vibration
Excessive vibration during the spin cycle can be unsettling. Make sure your washer is placed on a level surface and that all four feet are firmly touching the ground. Adjust the feet if necessary to stabilize the machine.
8. Foul Odors
Persistent foul odors can develop in washers due to the accumulation of detergent residue, fabric softener, and moisture. Clean the drum and the detergent dispenser regularly with a mixture of vinegar and baking soda to eliminate odors effectively.
9. Door Won’t Unlock
If the washer door remains locked after the cycle finishes, wait for a few minutes, as there might be a delay before it unlocks. If the door still won’t unlock, try running a short rinse and spin cycle to reset the locking mechanism.
If your washer door remains locked even after the cycle has finished, follow these steps to resolve the issue:
Wait for the Delayed Release
Many washers have a built-in delay before the door unlocks. Wait for a few minutes to allow the mechanism to release the door.
Perform a Power Cycle
Unplug the washer for a few minutes and then plug it back in. This can sometimes reset the door lock mechanism.
Check the Door Lock Assembly
If the door still won’t open, the door lock assembly might be malfunctioning and need replacement.
10. Excessive Foam
Excessive foaming during the wash cycle can lead to poor cleaning results and potential damage to the washer. Ensure you’re using the right type and amount of detergent recommended by the manufacturer.
11. Damaged Drum Rollers or Suspension Springs
Worn-out drum rollers or suspension springs can also lead to noisy and shaky wash cycles. Inspect these components for any signs of damage or wear and replace them if necessary.
12. Washer Fails to Fill with Water
When your Kenmore Series 700 washer doesn’t fill with water, it can be a frustrating issue. However, before you jump to conclusions, go through these troubleshooting steps:
Check the Water Supply
Ensure that the water supply valves connected to the washer are fully open. If they are partially closed, the washer won’t get enough water to start the cycle. Additionally, check for kinks or blockages in the water hoses.
Water Inlet Valve Malfunction
A faulty water inlet valve can hinder water flow into the machine. To determine if the valve is the culprit, perform a simple test. Disconnect the hoses and clean the inlet screens. If the issue persists, the water inlet valve might need replacement.
13. Agitator not working
Oftentimes, the Kenmore washer agitator not working and turns out, the washer won’t spin or agitate at all.
Inspect the agitator for any rough edges or signs of damage. A damaged agitator can cause tearing and staining of clothes during the wash cycle.
Use the Right Detergent
Using the wrong type of detergent or using too much detergent can result in residue build-up on clothes. Always follow the manufacturer’s recommendations for the appropriate detergent and quantity.
Check for Rust or Corrosion
Rust or corrosion inside the drum can transfer onto clothes during the wash cycle. Inspect the drum and, if necessary, use a rust remover to clean it.
Why is my Kenmore Series 700 washer not turning on?
If your Kenmore Series 700 washer is not turning on, there are a few potential reasons to consider. First, ensure that the power cord is securely plugged into a functional electrical outlet. Check for any tripped circuit breakers or blown fuses that may be affecting the power supply. Additionally, inspect the washer’s control panel for any error codes or indicators that might suggest a specific issue. If the problem persists, it’s best to consult the user manual or reach out to a professional technician for further diagnosis and repairs.
My Kenmore Series 700 washer is leaking water. How can I fix this issue?
A leaking washer can be caused by various factors. Start by checking the water inlet hoses and connections to ensure they are tightly secured and free of any damage or cracks. Inspect the door seal gasket for signs of wear or tear, as a damaged gasket can lead to leaks. Additionally, look for any blocked or clogged drain pipes. If you identify any issues during your inspection, replace the faulty parts or tighten the connections as needed.
Why is my Kenmore washer producing excessive vibrations during the spin cycle?
Excessive vibrations during the spin cycle can be caused by an uneven load distribution or an unbalanced washer. Make sure to load the washer evenly with clothes distributed around the drum. Avoid overloading the washer, as this can also contribute to vibrations. Check if the washer’s feet are leveled properly by adjusting them if necessary. If the problem persists, check if any of the washer’s suspension springs or shock absorbers are damaged or worn out.
The detergent dispenser in my Kenmore Series 700 washer is not working correctly. How can I resolve this issue?
If the detergent dispenser is not dispensing detergent properly, it may be clogged or blocked. Remove the dispenser drawer and clean it thoroughly, ensuring there is no residue or buildup obstructing the flow of detergent. Additionally, check the water inlet and make sure it’s not blocked, as this can affect the detergent’s distribution. Some washers have different compartments for different types of detergent; ensure you are using the correct one for your detergent type.
My Kenmore Series 700 washer’s drum is not spinning. How do I troubleshoot this problem?
When the washer’s drum fails to spin, there are several potential causes to investigate. First, ensure that the door or lid is closed securely, as most washers have safety features that prevent spinning if the door is open. Check for any obstructions or jammed items inside the drum that might prevent it from spinning freely. Additionally, inspect the drive belt for any signs of wear or damage; a broken or worn-out belt can hinder the drum’s movement.
Conclusion:
Owning a Kenmore Series 700 washer provides the convenience of efficient laundry cleaning. However, encountering troubleshooting issues is common in any appliance’s lifecycle. With the help of this comprehensive guide, you can now address and resolve the most common problems that may arise. Remember to follow the recommended maintenance tips to keep your washer running smoothly for years to come. Happy washing!
Leave a Reply