How to reset Amana washer lid lock?

Are you worried about your Amana washer lid lock that’s stuck or won’t work and need a reset? If it is your pain, you are in the right place. 

Here we describe the resetting method of your lid lock that you can perform easily.

To perform the reset, 

• Turn your washer off and unplug it for a few minutes (maybe for 3 minutes). 
• Re-plug the washer. 
• Then press and hold the button of the Cycle Signal or End of Cycle only for 20 seconds. It will reset your Amana washer lid lock. 

Actually, your Amana washer lid lock may need to be reset if the lid is fully locked or won’t lock, won’t work, the lid switch is stuck, or the lid mechanism is damaged or broken.

So if one of these is your issue, this article will provide you with the best understanding of the resetting method of your Amana washer lid lock.

How to reset Amana washer lid lock

Resetting your Amana washer lid lock can solve many of your experienced problems. Yet you should perform it perfectly to ensure the proper result. 

Diagnose the washer

Diagnostic mode is the key to understanding what’s wrong with your washer.

To begin, Ensure your washer is turned off and all indicator lights are off. Now, follow these steps:

1. Turn the Control Dial: Rotate the control dial one complete rotation (360 degrees) counterclockwise, stopping with the dial pointing straight up.

2. Quickly Dial 3 Clicks Clockwise: Within about six seconds, turn the control dial three clicks clockwise, followed by one click back and one more click clockwise. This sequence should activate all the green status lights.

If the status lights don’t blink, don’t worry. You can try again, adjusting the speed of turning the knob slightly.

Once the lights blink successfully, congratulations, your washer is in diagnostic mode.

However, you can reset your lid lock on the Amana washer in two ways.

Here is a step-by-step guide that should help you out. The first way is

First, you need to turn off your Amana washer. Then unplug it from the electrical outlet to ensure your safety. 

Open the washer’s lid to access the lid lock mechanism. If the lid is already locked, you can try unplugging the machine for a few minutes, which can sometimes release the lock.

You may usually locate it on the underside of the lid. Look for a little plastic protrusion or a metal tab. 

Press and hold the switch down for a few seconds until you hear a click. It will reset your Amana washer lid lock.

Release the switch and close the lid.

Plug your Washing machine back in. Then turn it on. It should now be able to start, and the lid should lock properly.

Start a new cycle and check if the lid lock engages

If the steps can’t solve this issue, perform the steps below after completing the above step 3

Use a screwdriver to remove the screws. These screws hold the lid lock mechanism in place.

Once you have removed the screws, disconnect the wires that connect the lid lock to the Washer’s control board. You must be careful not to damage the wire or connectors.

Now reconnect the wires. Ensure that they are firmly connected and in the correct order.

Check Lid Lock Mechanism

Follow this simple guide to check the lid lock mechanism on your Amana washer:

1. Unplug the washer from the power outlet to ensure your safety.
2. Locate the lid lock assembly on the top of the washer. It is usually located near the edge of the lid.
3. Inspect the lid lock for any visible damage or signs of wear and tear.
4. Check the wiring connected to the lid lock for any loose or disconnected wires.
5. Using a multimeter, test the continuity of the lid lock. Ensure the multimeter is set to the appropriate setting for continuity testing.
6. If the lid lock does not show continuity when it is locked, it indicates a faulty mechanism that needs to be cleaned or replaced.
7. Proceed to the next section to learn how to clean a faulty lid lock.

Test the Washer

After replacing the lid lock mechanism, test the Washer to see if the lid lock has been reset. 

Close the lid or door and turn on the Washer. If the lid lock engages, you have successfully reset the mechanism.

That’s it! By following these steps, you should be able to reset the lid lock on your Amana washer. 

When to reset Amana washer lid lock?

Amana washer is the best cloth washing machine that’s becoming popular day by day.

But from time to time, we face some trouble with it. So owing to this problem, in some cases, we may need to reset the washer. 

Anyway, among this problem, we may face trouble with our Amana washer lid lock. In that case the lid lock may not locking. So, in that case, we need to reset the lid lock to make it work again.

However, you may now want to know when or why you need a reset of the Amana washer lid lock. 

Don’t worry. In this section, we will provide you with the best guide on when you need to reset the lid lock:

The washer fails to start or stops mid-cycle

It will be one common reason for resetting the lid lock if the washer fails to start or stops mid-cycle. 

It indicates an issue with the lid lock mechanism or the control board that controls the lock. 

If you reset the lid lock in that case, it can sometimes fix the issue and allow the washer to start or continue the cycle.

The washer displays an error code related to the lid lock

If your washer displays an error code related to the lid lock, you may reset it to fix the issue.

Error codes may indicate many issues with the Washer, including problems with the lid lock.

So resetting the lock may help clear the error code, and the washing machine can operate normally.

Make sure, you come to know the troubleshooting of diagonistic error codes of Amana washer

The lid lock mechanism is damaged or broken

If you notice your lid lock mechanism is damaged or broken, you can reset it to solve the issue. 

Sometimes resetting may temporarily fix this issue, but it is better to replace the lid lock if it is damaged.

The washer lid is stuck closed or will not lock

If the washer lid is stuck closed or will not lock, resetting the lid lock may be necessary to troubleshoot the issue. 

The lid lock mechanism may be jammed or damaged, or there may be an issue with the wiring connections. 

So you can reset the lid lock because it can sometimes help resolve the issue. Yet further troubleshooting may be necessary to determine the root cause of the problem.

However, resetting the lid lock can sometimes fix the issues with the washer’s operation. Yet if the problem persists, you may need to troubleshoot further or contact a professional technician for assistance. 

Note: The reason for needing a reset on the lid lock can vary depending on the specific trouble being experienced.

• To reset your Amana washer, turn the washing machine off. 

• Remove the power source and press the start button. 

• Now keep waiting only for 10 to 30 seconds. It will reset your Amana washing machine.

If you want a detailed guide read this post: Amana washer reset

Drainage mode for front load washer

You don’t add the water source in your front load washer but turn it on. In that case, your washer’s door/lid may be locked and will turn into drainage mode.

That’s why you may notice an error code of ‘F4 E1’. Even you can see the error code of ‘LO FL’.

So what can you do to unlock your washer lid if it’s happening?

• You can press the power button to unlock the washer. 
• After that, the draining cycle will start and last for 8- 10 minutes. 
• After passing the time, you can try to use the washing machine again.

Clean the lock

If you have a front-load washer and don’t clean it regularly, it may be locked over time. 

The residue of detergent or soup scum, any dirt may cause blockage the lock and continue water from their water tubs over time.

So you can solve this issue by cleaning the existing water from the inside of the lid. To do this,

• Turn off your washing machine.
• Swipe the washer’s Lid.
• Use a paper towel or soft cloth to wipe down the residue and clean it.

If you regularly do this work, you may be able to maintain your lid lock.

However, if you can’t suspect the exact cause of the lid lock issue, it may be best to consult the washer’s user manual or contact an experienced technician.

You can even unlock the door on the Amana washing machine by following the below steps:

Pause the Washers by pressing the Pause button.

Wait for the Washers to come to a complete stop.

Unplug it from the power outlet.

Stay a few minutes to allow it to cool down and reset.

Plug your Washer back in. Now turn it on again.

Press the “Start” button to resume the cycle. The lid lock should disengage, and you should be able to open the Lid.

If the lid lock does not disengage or unlock, you may need to check for error codes and further troubleshoot the issue. 

How do I turn off control lock on my Amana washer machine?

Many modern Amana washing machines are featured with a control lock. It prevents accidental activation of the control panel. 

This feature is especially useful if you have children who may accidentally press the buttons on the washer. 

Even, if you want to prevent unintended changes to the washing cycle, it is beneficial.

Anyway, if you want to turn off the control lock on your Amana washer machine, follow these steps:

1. Locate the “Control Lock” button on the control panel of the washer. It is typically labeled with a padlock icon. The location of the control lock may differ depending on your used model.

2. Press and hold the Control Lock button for 3 to 5 seconds until the Control Locked indicator light turns off.

3. Once the “Control Locked” light is off, the control panel will be unlocked. Now you can operate the washer normally.

If you cannot find the Control Lock button or the above steps do not work, consult the washer’s user manual or contact Amana customer service for further assistance.

In conclusion

If you need to reset your Amana washer lid lock, follow the impressive guide in our article. This article will provide you with the resetting process of the lid as well as offers troubleshooting tips on its related problem.

So, you don’t need to go anywhere. Yet if you can’t fix this issue and encounter any extra problems, don’t hesitate to call a professional technician. They will help you find out your exact problem and help you fix your issues.