Do you have an Amana washer? It keeps filling water or won’t fill with hot/cold water. If it is, it could be an indication of a problem.
However, before you panic and call a technician, check a few things yourself to troubleshoot these issues.
The easiest way is to Try out Amana master reset method to get it up and running again.
But it won’t work with the internal parts of Amana washing machine ain’t working or defective.
Amana washer won’t fill up with water
If your Amana washer won’t fill up with water, there are some probable causes. So to troubleshoot this problem, you should check the possible causes and then take steps to fix it.
Anyway, here we will learn the probable causes of your washer not filling up with water with their potential solution:
Let’s get started:
Faulty Water inlet valve
The water inlet valve is the most crucial part of the water flowing. If any dirt, debris, or kinks accumulates in the water inlet hoses, it will prevent the hot or cold water from flowing smoothly.
How to check the water inlet valve?
You should check if the hoses have any kinks or damages. In the above section, you have read about the water inlet valve. So check it and solve this issue.
If you need to replace the old one then follow this article how to change Amana the water inlet valve.
Amana washer is not filling up with hot or cold water
If the door lock switch is malfunctioning, the washer may not fill with water no matters it is with hot or cold water.
So check to see if there are any problems with the door lock switch.
Check the Malfunctioning water level switch
The water level switch controls the water flow in the washer. If it is malfunctioning, the washer may not fill up with water.
Before going to fix it, you should check if it has continuity.
How can you check it? Just follow the above section. We have already described the process. You can perform these to check your water level switch.
You may use a multimeter to check the switch.
If it has no continuity, replace the water level switch with a new one.
Check water hoses and water supply
Ensure both hot and cold water supply is turned on and connected. If you only connect either hot or cold water to the power supply, it will restrict the wash performance.
So check your household faucets to ensure the connection of hot and cold water to the water supply line is perfect.
Amana washer Low water pressure
Low water pressure can also cause the washer to fill up slowly or not at all. A washing machine needs 20 to 120 psi of water pressure to function perfectly.
So check if it has any problem. You can follow the above section to do it.
What can you do?
If you suspect any issue with the washer’s inlet valve or pressure switch, replace them with a new one.
If you are staying in a low-pressure area, buy a pressure pump. It will reduce your trouble by improving the water pressure.
Note: you are reading on how to troubleshoot while won’t fill up with water. This blog post is about Amana washer keeps filling with water.
Test the water temperature
If your Amana washer is not filling up with hot or cold water, you can check the temperature of the water coming out of the faucet. That is to ensure it is the right temperature.
If the water temperature is wrong, you may need to adjust the temperature setting on your water heater.
If you have a front loader washer, a faulty timer may be responsible for your washer not filling with water. Yet it’s not a common problem.
You may need to replace it with a new one if it is faulty.
If you have a control board instead of the timer and it is defective, it could prevent the tub from filling with water.
What can I do?
You can call a trained technician to check the main control board. They can check if there are any signs of damage or burn marks.
They may check if a shorted-out component needs additional troubleshooting.
In conclusion
Your Amana washer may be overflowing or won’t stop to fill up due to its malfunctioning water level switch, water inlet hoses, or main control board.
Whatever else, we think this article has provided you with a better understanding of how you can fix to stop the overflowing or ensure a proper water flow.
So you can try the methods to solve your issues before calling a professional.
Source:
https://producthelp.amana.com/Troubleshooter?thispageid=4638#contentSection
Leave a Reply