Amana Washer Not Washing: Troubleshooting Steps

You may load your washer, choose the cycle, and click on Start, but it wont start and won’t wash. What could be the causes behind this behavior?

The control may be locked or not set properly, the delay start settings may be activated, or the power cord is not plugged in.

If this is happening, try to press and hold the start button for 3 seconds to start the washer.

If your washer is draining, agitating, rinsing, washing, won’t fill, or not working at all, try our troubleshooting ideas.

We will give you a comprehensive guide on what you can do if your washer is not washing and how to troubleshoot it with easy steps.

Table of Contents

Why is My Amana Washer Not Washing?

Your Amana washer may not wash for several reasons. The most probable cause is the following things:

Power supply issue
Water supply issue
The door or lid isn’t closed properly
The delay start settings may be activated.
Malfunctioning of the start/pause button
Locked control

Amana Washer Won’t Wash: Quick Solutions

If your Amana washer is not washing properly, the following troubleshooting steps for both top loader and front loader models will help you resolve the issue.

Troubleshooting Steps for Top Loader Washers:

Check the lid switch:

If your washer door or lid is not closed properly, the washer’s safety mechanism prevents the washer from starting and washing.
Sometimes you may think the door is locked. But it will be closed while not locked perfectly.
In that case, open and close the lid firmly and try again.

Start/Pause Button:

If the start or pause button is unresponsive or stuck, the washer won’t start the wash cycle.
Press this button firmly to confirm it engages perfectly.

If you find any fault, you may need professional help.

Load Size and Distribution:

Don’t overload the washer. It can affect its ability to agitate, clean, and wash effectively.

Troubleshooting Steps for Front Loader Washers

Inspect the door lock:

Your front loader washers have a door lock mechanism. It ensures the door keeps locked during operation.
If the door lock is faulty or not engaging properly, your washer won’t start the wash cycle.
Check this door lock and latch to confirm they are in good condition and it is closing correctly.

Locked control:

Does your front load washer contain an electronic touchpad? If yes, click on Next (don’t the lights).
If you see the control lock lights ON, hold this button only for three seconds to open or unlock the control panel.

Detergent and Dispenser:

Always use the recommended type and amount of detergent for the laundry load.

Clean your detergent dispenser drawer regularly to stop dispenser softener drawer fill up with water.

Power Supply Issues for the Front or Top Loader Washer:

Check if your washer is perfectly connected to a power source.

Check if the power cord is properly plugged into the grounded three-prong electrical outlet. Don’t use an extension cord here.
Then check if there are no issues with the circuit breaker or fuses. If yes, change or replace the fuses with new ones.

Amana Top or Front loader washing machine not washing

Check to verify the water inlet valve is connected to the washer and turned on.

Even check that the water is flowing smoothly. If any water isn’t reaching the.
Inspect the inlet hoses for any kinks, blockages, or leaks.

Delay start settings:

If the delay start setting is activated in the washer, it may be the cause of not washing.

Check to confirm if it is activated. If so, the washer will begin the wash cycle automatically.

As a last resort, you can try to reset the Amana washer to remove its minor glitches. It may resolve this issue.

Amana washer fills but won’t wash

Generally, your amana washer may encounter several issues over time. In that case, you need a broad Amana washer troubleshooting manual that will help you solve most of the problems.

Among them, What can you do if your Amana washer is filled with water but not washed?

Here are some potential culprits:

Issues with the lid switch, belts, motors, or timers.
Overloads or loads that are too light.
Control board issues.
Low water pressure.
Clogged or defective inlet screens or filters.

If your Amana washer is filling with water but not starting the wash cycle, here are the solutions for both top-loader and front-loader washers:

Solution for Top Loader Washer

Check the load size:

Overloading or loading the washer too lightly may prevent proper load distribution and washing.
Don’t exceed the recommended load capacity for your washer model.

Verify the lid switch:

If the top load washer door or lid is not closed correctly, the washer’s safety mechanism prevents it from washing when it fills with water.

The lid switch may be faulty and not operating suitably.

Open and close the lid several times to ensure it is firmly closed.

Examine the agitator: Amana washer agitator may not working due to bad installation like screw loose issue. Here you need to remove the agitator and install it . Here are a few key take-aways with it:

The agitator in your top loader washing machine helps move the clothes during the wash cycle.

If it isn’t functioning or is obstructed, it may prevent the washing process.

Check for any damage or obstructions and address them accordingly.

Check the drive belt:

The drive belt transforms power from the washer motor to the agitator.

If it’s worn out, damaged, or loose, it may prevent the motor or agitator from functioning.

Inspect the drive belt of your Amana washer and replace it if necessary.

Solution for Front Loader Washer

Check the Door lock:

Front loader washers have a Door lock mechanism that keeps the door locked during operation.
If the door lock is faulty or malfunctioning, your washer will fill with water but won’t start the wash cycle.
Check the door lock and latch to ensure they are in good condition and closing correctly.

Check the water pressure:

Insufficient water pressure in your front loader Amana washer may affect the washing process.
Ensure water pressure is sufficient and water supply valves are fully open.

If the water pressure is low, contact a plumber to address and resolve this issue.

Inspect for error codes:

If your front loader Amana washer has a digital display, it may show error codes for malfunctioning.
Check out the diagonistic error codes instructions to recognize and resolve these issues.

Motor or drum issues:

Mechanical problems with the motor or drum can prevent the washer from washing despite filling it with water.
If you notice any unusual noises, vibrations, or irregularities during the wash cycle, it may indicate a mechanical problem.
In such cases, you should contact a professional to repair or maintain your Amana washer.