Amana Washer Lid Lock Bypass: 3 Easy & Quick Methods

Amana washer lid lock bypass is an alternative method you can do when you face some issues with the lid lock mechanism.

If you own an Amana washing machine and have encountered issues with the lid lock mechanism, you may be wondering if there is a way to bypass it. 

The lid lock serves as a safety feature to prevent accidents and ensure the proper functioning of the machine. 

However, there may be situations where you need to bypass the lid lock for various reasons. 

In this comprehensive guide, we will discuss the Amana washer lid lock bypass method, providing you with step-by-step instructions to help you overcome this challenge.

How to bypass lid lock on Amana washer?

If it is your top-load Amana washer, you can bypass your lid lock using three methods. Such as overriding the lid lock, cutting the wire of the lid lock switch, and gaining access to the lid lock switch.

Yet, before starting, you can follow the user manual in your washer model to get proper information.

Or even, we’re here to teach you the process in easy steps. Follow and try yourself before calling a repairman. Let’s get the three processes in easy ways:

1. Access to the lid lock

Step 1: Safety First

Before applying any methods, you should first ensure that the washing machine is unplugged from the power source. It’ll avoid any electrical accidents during the bypass process. Safety should always be the top priority.

The lid lock is an important safety feature that prevents accidents during the wash cycle. Disabling or bypassing it may compromise the safety of the machine and its users.

Step 2: Amana washer lid switch location

Locate the lid lock mechanism on your Amana washing machine. It is usually positioned near the front of the machine, under the lid.

Step 3: Access the Lid Lock Assembly

To access the lid lock assembly, you may need to remove the control panel or the top cover of the washing machine.

Step 4: Locate the Lid Lock Wires

Once you have accessed the lid lock assembly, locate the wires connected to the lid lock mechanism.

There will typically be two wires, one for the lock and the other for the sensor.

2. Override the locking system with a magnet

Step 1: 

Insert a magnet where the lid lock switch joins the washing machine cabinet. There is a solenoid valve under the cabinet. It is a powerful electromagnet.

Inserting a different magnet will provide a stable magnetic connection between the solenoid valve and the separate magnet.

• Here you can use all types of small thin magnets just like a fridge magnet. It will completely cover the lid.

Step 2: 

Reconnect the top panel, install the washer, and run a washing test. Never forget to pre-fill the tub with water.

If you want to use it regularly, you can directly open and close the lid with a magnet. It does not affect the simple operation of the washer at all.

• This test will be required if you want to add extra load without constantly turning the washer off.

Step 3: 

Adjust the magnetic field when the washer is still shut off. Assuming that the device is working correctly, you may have no option but to re-open it and try again.

• Check the magnet’s pretty pulling force is pointing down. Otherwise, they may not produce a solid connection with the solenoid valve.
• If you are having an issue finding a strong magnet to run the connection, unscrew the plug set to the side of the washer lid. You can always fix it back after finishing the method.

3. Cutting the wires

If you don’t use the magnetic process, you can bypass your Amana washer lid switch by cutting the wires.

In this process, keep your washer and water supply off. Then follow the below steps:

1. First open the washer’s lid and locate the screws that secure the control panel to the washer’s top or front.

2. Remove these screws using the appropriate screwdriver. Now slide the control panel forward or lift it up to access the lid lock assembly. You can use a putty knife to lift up the lid lock and unlock it.

3. Now, verify the washer’s specifications to identify which wires to cut. The technology shield will include a wiring chart showing the wiring tagged“lid switch” and “lock switch.” Most washing machine locks work with three or four wires. If the switch has 3 wires, cut the cables on either side of the middle cable.

4. Cut the cable that is connecting the lid and the locking element. Use a sharp putty knife or cutter and cut directly from the center of each cable.

5. Remove the cap at the end of each wire. You may need to pull an inch of insulation from the end of the wire by connecting the cable together. This will release excess clutter so you may work more actually.

6. Now attach the cable connector. Weld both ends of the cable by using an electric tape.

The lid may now open and close freely at any time while operating.

Step 7: Reassemble the Washing Machine

After bypassing the lid lock, reassemble the washing machine by following the reverse steps of the disassembly process. Make sure all components are securely attached before moving forward.

Step 8: Test the Machine

Plug the washing machine back into the power source and perform a test run to ensure that the bypass was successful.

Start a cycle and observe the machine’s operation to verify that it functions as expected.

How to replace amana washer lid lock

Replacement of the amana washer lid lock will be better to bypass it. if you are handy for a new lid lock, you should replace it and then run the cycling process in your washer.

Note: Before attempting any repairs or replacements, ensure to unplug the washer from the power source to avoid any accidents.

Here’s a general guide to replacing the lid lock on an Amana washer:

1. Gather the necessary tools:

• Screwdriver (Phillips and/or flathead, depending on the screws used)
• Replacement lid lock assembly (ensure it’s compatible with your Amana washer model)

2. Accessing the lid lock assembly:

• Open the washer’s lid and locate the screws that secure the control panel to the washer’s top or front.
• Remove these screws using the appropriate screwdriver.
• Depending on the model, you might need to slide the control panel forward or lift it up to access the lid lock assembly. You may even use a putty knife to lift up the lid lock and unlock it.

3. Removing the old lid lock:

• Once you can access the lid lock assembly, locate the screws or clips holding the lid lock in place.
• Carefully remove the screws or unclip the assembly.
• Disconnect any wires or connectors attached to the lid lock.

• Take note of their positions or take a picture to help you during reassembly.

4. Installing the new lid lock:

• Take the new replacement lid lock.
• Connect any wires or connectors, making sure they are in the correct positions.

• Align the lid lock assembly in place and secure it with screws or clips.

5. Reassembling the washer:

• Put the control panel back in its original position.

• Secure the control panel with the screws you removed earlier.

6. Testing the lid lock:

• Before fully reassembling the washer, plug it back into the power source.

• Close the washer’s lid and run a test cycle to ensure the new lid lock is functioning correctly. To do that, press the start button and see!

• If the lid lock is working correctly, you can proceed to reassemble the washer fully.

Remember, these steps are general guidelines. Specific models may have slight differences in the process.

So, always consult your washer’s user manual or look for model-specific repair guides from Amana.

If you’re uncomfortable performing the replacement yourself, it’s best to seek assistance from a professional.

How to reset the Amana washer lid lock?

If you can bypass the lid lock for its fault, you can manually reset the lid lock switch. It will help to resolve your issue. But how can you reset your Amana washer lid lock?

Don’t worry. We’ve already written an article about the resetting process of the Amana washer lid lock. Go and read the post carefully.

Conclusion

Bypassing the lid lock mechanism on your Amana washing machine can be a temporary workaround for various situations. However, it is essential to prioritize safety and be cautious when operating the machine without the lid lock engaged. Following the step-by-step instructions provided in this guide, you can successfully bypass the lid lock and continue using your washing machine as needed. Remember, if problems persist or for a permanent resolution, it is advisable to seek professional assistance.