The blinking wash light on your Amana Tandem 7300 washer typically indicates a problem with the washing cycle. It could be due to issues such as unbalanced loads, door lock problems, or an error in the control board.
How to fix the Amana tandem 7300 washer wash light blinking
In this guide, we will walk you through the troubleshooting steps to get your Amana Tandem 7300 washer up and running smoothly again.
Step 1: Unplug and Assess the Situation
Upon encountering a blinking red light and an inaccessible door on your Amana Tandem 7300 washer, it’s crucial to start by disconnecting the power supply.
This step ensures your safety and prevents any potential electrical mishaps. Once you have unplugged the washer, you can proceed to investigate the issue further.
If the wash light is blinking and the cycle doesn’t start, first make sure the door is properly closed and locked.
Check for any obstructions that might prevent the door from locking. Additionally, ensure that the water supply valves are fully open and that the water pressure is adequate.
Step 2: Locate and Open the Filter Valve
To address the blinking red light and the water-filled drum, you need to locate and open the filter valve. Look for the filter on the front of the machine, usually positioned at the bottom. In some cases, it might be concealed behind a removable panel. Unscrew the filter valve carefully, ensuring you have a bucket or container ready to catch any water that might spill out.
Step 3: Clearing Blockages and Draining the Water
As you open the filter valve, you may discover the cause of the issue—a blockage in the filter or the drain. Check for any foreign objects, such as coins, lint, or debris, that could be obstructing the flow of water. Gently remove any obstacles, taking care not to damage the filter or other internal components.
Step 4: Reassembling and Testing
Once you have cleared the blockage, carefully reassemble the filter valve. Make sure it is tightly screwed back into place. Now, it’s time to test your Amana Tandem 7300 washer. Plug it back in, and power it on. With the blinking red light issue resolved and the water drained, you should see a positive change in your washing machine’s performance.
Is a blinking wash light always indicative of a malfunction on the Amana Tandem 7300 washer?
Not necessarily. While a blinking wash light on the Amana Tandem 7300 washer often signals an issue, it might also indicate a cycle in progress or a pause. Check the washer’s display panel and manual to understand the specific conditions that trigger the blinking light. If you’ve ruled out normal operation and the blinking persists, consult the troubleshooting section of the manual or contact Amana support for assistance.
Can an unbalanced load cause the wash light to blink on the Amana Tandem 7300 washer?
Yes, an unbalanced load can trigger the wash light to blink on the Amana Tandem 7300 washer. The washer’s sensors detect excessive vibrations caused by unevenly distributed laundry. To resolve this, pause the cycle, rearrange the clothes to create a balanced load, and then resume the cycle. This should help prevent the wash light from blinking due to load imbalance.
Conclusion
Congratulations! You’ve successfully troubleshot and resolved the blinking red light and full drum issue on your Amana Tandem 7300 washer. Take a moment to appreciate your newfound knowledge and your restored appliance. It’s time to enjoy hassle-free laundry once again.
Leave a Reply