Amana ntw4516fw3 troubleshooting Quick Guide

Amana NTW4516FW3 Troubleshooting guide will let you know: as a top loader washer, how you are supposed to find the solution.

This NTW4516fw3 washer is a reliable appliance that makes doing laundry an effortless task. However, it gives you a hard time once in a blue moon. So, I’m here to help you. Unless, any replacement or restoration of any part or pacel of Amana washer, you will find this guideline pretty handy to troubleshoot.

If you are having trouble with the Lid switch, spinning, and wash cycle related issue then make sure you will mindfully scroll down the rest of the article.

Amana NTW4516FW3 Troubleshooting: Step by Step

Washer troubleshooting ain’t easy as there are so many hacks to fix.

Sorting out the Amana washer problems would be the breeze here.

No worries!

In this guide, we will address some of the most common issues that Amana NTW4516FW3 users face and provide step-by-step solutions to fix them.

Amana troubleshooting washer NTW4516FW3 Lid Switch Fault

The Amana top loader washer lid lock is designed to prevent the machine from starting the wash cycle until the lid is securely closed. 

Here are some of the most common Amana washer top loader lid lock problems:

Lid lock won’t engage: One of the most common problems with the Amana washer lid lock is that it won’t engage. This can be caused by a faulty lid lock switch or a problem with the wiring.

Lid lock won’t release: This can be caused by a faulty lid lock switch or a problem with the wiring.

Lid lock light is flashing: If the lid lock light on your Amana washer is flashing, this could indicate a problem with the lid lock or the wiring.

Washer won’t start: If your Amana washer won’t start, it could be due to a problem with the lid lock. The machine won’t start the cycle until the lid is securely closed and the lid lock is engaged.

You can easily resolve this issue by resetting Amana washer lid lock

Washer won’t spin: A faulty lid lock can also prevent the Amana washer from spinning. If the lid is not properly closed and the lid lock is not engaged, the machine will not spin. It happens due to the Amana washer off balanced load.

Lid lock is noisy: If the lid lock on your Amana washer is making noise, it could be due to a problem with the switch or the wiring.

Amana ntw4516fw lid switch error code indicates that the washer’s lid switch is malfunctioning.

To fix this, check if the lid is closing properly. If it’s not, adjust the lid or replace the switch.

To replace or adjust it you must need to find the Amana washer lid switch location

The ntw4516fw lid switch is located near the top of the washer’s cabinet, underneath the lid. 

How to replace the lid switch in an Amana washer

You can easily replace the lid switch by using a 1/4 inch nut driver, a 5/16th inch nut driver, and a Phillips head screwdriver. Before starting the repair, it is important to disconnect the power source.

The process involves removing screws from the control console, disconnecting the grounding wire and wires from the old lid switch, removing the old switch, installing the new switch, reattaching the wires and grounding wire, and putting the console back in place

Here are the steps to locate and then replace the lid switch on an Amana top-loading washer:

• Unplug your Amana washer from the electrical outlet to ensure your safety.
  
• Open the washer’s lid and locate the two screws at the back of the control panel.
  
• Use a screwdriver to remove the screws and flip the control panel back.
  
• Look for the lid switch assembly located at the top of the washer’s cabinet, under the control panel.
  
• The lid switch is typically a small plastic device with wires attached to it, and it is usually held in place by two screws.

How to bypass Amana ntw4516fw3 lid lock

• Unplug the washer from the electrical outlet to ensure your safety.
• Locate the lid lock on the top of the washer. It is a small rectangular piece with a white or gray cover.
• Remove the screws that hold the lid lock in place using a screwdriver.

• Lift the lid lock out of the washer and locate the three wires that are connected to the lock.
• Use wire strippers to strip a small section of the wire insulation from each of the three wires.
• Use a wire connector or twist the exposed wires together to bypass the lid lock.
• Wrap the exposed wires with electrical tape to ensure they do not come into contact with any other parts of the washer.
• Reinstall the lid lock cover and screw it back into place.
• Plug the washer back in and turn it on.
• Test the washer by closing the lid and starting a wash cycle.

Reset Lid Lock

Resetting the Amana washer lid lock can be a simple solution to fix any issues you may be experiencing with the lid lock. Here is a step-by-step guide on how to reset the lid lock on your Amana washer:

• Unplug your Amana washer from the electrical outlet to ensure your safety.
• Wait for a few minutes to allow the machine to reset.
• Plug your washer back in and wait for the machine to power up.
• Close the washer lid and wait for the lid lock to engage. The lid lock light should turn on, indicating that the machine is ready to start.
• Press and hold the “Start” button for at least three seconds to start the machine.

Amana washer master reset NTW4516FW3

Here’s a general process for performing a master reset on your Amana NTW4516FW3 washing machine:

1. Ensure the washing machine is powered off and unplugged from the electrical outlet.
2. Allow the washer to remain unplugged for about 5 to 10 minutes. This time without power helps to clear any residual electrical charges and reset the internal systems.
3. Plug the washing machine back into the electrical outlet.

4. Reset the Control Panel:

• Press and hold the “Start” or “Pause” button for approximately 5 seconds.
• While holding the button, gradually press and hold the “Cancel” or “Power” button for another 5 seconds. Release both buttons.

5. Allow the washing machine a few moments to complete the reset process. You might see lights or indicators flashing during this time.

6. Once the reset is complete, you can select a regular wash cycle and start the machine.

Amana NTW4516FW3 Will Not Go Past Wash

If your this washer is not going past the wash cycle, here’s what you need to do for Amana NTW4516FW3 troubleshooting:

If you’ve overloaded the washer, it may not be able to complete the wash cycle. Remove some clothes and try again.

If the water level is too low, the washer may not advance to the next cycle. Adjust the water level and try again.

If the drain hose is clogged or kinked, the washer may not be able to drain properly, causing it to stop. Clean or straighten the hose and try again.

Amana NTW4516FW3 Does Not Advance to Rinse Cycle

If your washer is not advancing to the rinse cycle, follow these steps for Amana NTW4516FW3 troubleshooting :

Make sure the water supply valves are turned on and the hoses are not kinked.

A clogged or kinked drain hose can cause the washer not to drain, preventing it from advancing to the next cycle. Clean or straighten the hose and try again.

An overloaded washer may not be able to rinse properly. Remove some clothes and try again.

Amana NTW4526FW3 Not Spinning

If your Amana NTW4526FW3 washer is not spinning, here’s what you need to do:

An overloaded washer may not be able to spin properly. Remove some clothes and try again.

If the lid switch is faulty, the washer may not spin. Check if the lid is closing properly, and if it’s not, adjust the lid or replace the switch.

A worn-out or broken belt can prevent the washer from spinning. Replace the belt if necessary.

Amana NTW4516FW3 error codes

Error codes are usually designed to indicate particular issues or malfunctions within the washer. Amana NTW4516FW3 washer is a top-loading washer.

Here we include a few common error codes that were known up to that point:

LF, F8 E1, or Lo FL error codes

This code indicates a “Long Fill” error. It means the washer is taking too long to fill with water.

This could be due to a water supply issue, a clogged filter, or a problem with the water inlet valves.

How to fix it?

• Check that the water supply valves are fully open.
• Ensure that the water inlet hoses are not kinked or blocked.
• Clean the inlet screens or filters to prevent blockages.

”drn” error code

This code points to ”not draining properly”. It means the washer is taking too long to drain water or won’t drain properly.

This could be due to a clogged drain hose, a faulty drain pump, or an issue with the drainage system.

How to fix it?

1. Check the drain hose for kinks, clogs, or blockages.
2. Verify the drain hose is not positioned too far down into the standpipe, as this can cause siphoning.
3. Clean the drain pump filter if applicable

LdL (Lid Lock Error):

The “LdL” error code usually indicates a problem with the lid lock mechanism.
To fix it:

• Check if the lid is properly closed and latched.
• Inspect the lid lock assembly for any visible issues.
• If the lid lock is malfunctioning, it may need replacement.

”SD” error code

The “SD” code stands for “Suds Detected.” This occurs when the washer detects an excessive amount of suds during a cycle.

It may lead to issues with proper rinsing and draining. It’s often caused by using too much detergent or using a non-HE (high-efficiency) detergent.

How to fix it?

• Use only high-efficiency (HE) detergent in the appropriate amount.
• Run an extra rinse cycle to remove excess suds.

LdU (Lid Unlock Error):

The “LdU” error code suggests an issue with the lid-unlocking process.

Solution:

1. Check if the lid lock mechanism is releasing properly after the cycle is complete.
2. Check the lid lock assembly and associated wiring for any problems.
3. If the lid remains locked even after the cycle is done, it may require repair or replacement of the lid lock assembly.

lid (Lid Open Error):

The “lid” error code indicates the washer’s control unit detected that the lid is open during the cycle. To fix it:

• Make sure the lid is securely closed before starting a cycle.
• If the lid is closed but the error persists, there may be an issue with the lid switch or sensor.

Ofb (Off Balance) Error:

The “Ofb” error code appears when the washer detects an off-balance load during the spin cycle. To fix it,

• Pause the cycle and redistribute the load inside the drum to ensure even weight distribution.
• This error can also occur if the washer is overloaded. So remove some items from the load.

OL (Overload) Error:

The “OL” error code means the washer’s control unit detected an overload during the cycle. Follow the below steps to fix it,

• Remove some items from the load to reduce the weight.
• If this error continues to occur even with a smaller load, there may be an issue with the load sensor or control board.

PF (Power Failure) Error:

The “PF” error code indicates a power failure occurred during the cycle.
This code might appear when power is interrupted to the washer.
It’s a notification and doesn’t necessarily require any action. The cycle should resume once power is restored.

Amana washer not turning on NTW4516FW3

If your amana washer NTW4516FW3 isn’t turning on, follow the below steps to fix this issue:

If the washer isn’t properly plugged into a working electrical outlet, the washer won’t turn on.

Ensure the washer is plugged in and the outlet is functioning. Try using a different outlet if necessary.

If the circuit breaker that supplies power to the washer has tripped, it won’t turn on. In that case, reset it by turning it off and then back on.

The washer won’t start if the lid is not properly closed or the lock mechanism is malfunctioning. Ensure the lid is securely closed.

If the control lock is engaged, press and hold the designated button (often “Control Lock” or “Hold to Start”) for a few seconds to deactivate it.

If your Amana washer not turning on, you can read oour another post to completely fix this issues.

Amana washer stuck on sensing fill NTW4516FW3

When an Amana washer, such as the NTW4516FW3 model, gets stuck on the “Sensing” or “Fill” stage, it often indicates the washer is having trouble detecting the proper water level or detecting the water flow.

This issue can prevent the cycle from progressing and might be caused by various factors.

Here’s what you can do:

If the washer doesn’t detect sufficient water flow, it may stay in the “Sensing” or “Fill” stage.

Ensure the water supply valves are fully open and that water is flowing to the washer.

Clogged inlet screens or filters can restrict water flow and trigger this problem.

In that case, check the water inlet hoses for any kinks or twists. Also, inspect and clean any inlet screens or filters for blockages.

A malfunctioning water inlet valve may not open properly to allow water into the machine.

So, manually start the filling cycle and listen for a humming sound near the water inlet valve.

If you hear the sound but no water is entering, the valve might be faulty and needs replacement.

To learn the detailed solution if your Amana washer stuck on sensing fill, read this post.

Conclusion

Do you have any confusion about Amana ntw4516fw3 troubleshooting steps? We hope our troubleshooting guide will help you understand the reason and fix some problems with your Amana ntw4516fw3 model washer.

Yet, you should remember that safety precautions are necessary before trying any repair. Always first unplug the washer and then try the steps we’ve discussed above.

You can read the user manual to get more specific information and contact a professional if any steps are difficult for you.