When it comes to the reliable washing machines, Amana is a top player in the market. With their advanced diagnostic system, Amana washers can identify any problems and display error codes to guide you in resolving them. This guide covers all major Amana washing machine models, so you can easily troubleshoot any error codes you encounter.
Amana diagnostic codes explaination
Are you facing an error code on your Amana washer? Don’t worry, we’ve got you covered! Simply follow the instructions below to fix the main problem of error
Error code LOC or LC
If your Amana washer displays error codes LOC or LC, it means that the control lock is going to activate.
You can easily remove these error codes by pressing the control lock button which won’t work for a few seconds until the control-lock unlocks.
Error code dET
If you see the error code dET on your washer, it indicates that the detergent cartridge hasn’t been detected in the dispenser.
To sort out this issue, close the dispenser drawer and place the cartridge properly.
Error code Int
The Int error code tells you whether the wash cycle is paused or it is canceled.
If this occurs, wait for up to 30 minutes until the washer stocks on the final spin cycle and goes into drain mode.
To remove the error code, press the button (cancel or pause) two time consectively and the power button once.
If the error persists, try resetting your washer by turning off and on the power.
Error codes rL or F34
The error codes rL or F34 indicate that items are present in your washing machine during a cleaning cycle.
To remove the error code, remove any items and restart the cleaning cycle.
Error code Sud
If you see the error codes Sud or Sd, your washer has too many suds, which can overflow and cause a mess.
To resolve this issue, reduce the amount of washing powder or use high-efficiency detergent.
The washer will drain out and add water when it is required to dilute the suds.
Error code F5 E2
The error code F5 E2 means that the washing machine door isn’t locked.
Ensure that nothing is making trouble as an obstacle from locking the door. To do so, press the pause/cancel button twice and the power button once to resolve the error.
Error code F7 E1
The error code F7 E1 indicates a problem with the motor speed.
Check that your washer isn’t overloaded and ensure that all the shipping bolts have been removed if you have a new Amana washer.
If don’t know how to install and more troubleshooting tips then read Troubleshoot Amana washer.
Press the pause button twice and the power button once this will restart the washing cycle.
Error codes F8 E1 or LO FL
If you see the error codes F8 E1 or LO FL, your washing machine has low water flow.
Check that the water supply is turned on correctly and that the water hoses aren’t damaged or kinked.
Once you’ve adjusted the water supply, press the button twice and the power button once to reset the washer.
Error code F8 E2
The error code F8 E2 suggests a problem with the dispenser system. Ensure that the detergent drawer and cartridge aren’t clogged up and are positioned correctly.
Error code F9 E1
The error code F9 E1 means that your washer is taking too long to drain.
Ensure that the drain hose isn’t blocked or kinked. Also, make sure that the drainpipe isn’t too high or too low.
If you encounter any other error codes, simply turn off your washer for a couple of minutes, and then plug it back in. Once the power is back on, try running a wash cycle and see if the error code has disappeared.
Conclusion
In conclusion, with Amana’s advanced diagnostic system, you can easily troubleshoot any error codes that you encounter on your washing machine. By following the simple steps outlined in this guide, you can quickly resolve any issues and get your washer back up and running smoothly. Trust in Amana’s high-quality products and innovative features to keep your laundry looking fresh and clean.
Leave a Reply